I have done this exact configuration on a raspberry pi zero w. Unfortunately it doesn't appear to be working. I checked to make sure none of my soldered wires bridged (I have just the 3 wires set up.)
I'm fairly confident that I have it set up correctly (there's only 4 wires that need to be saldered 5V, Ground, and Composite + 5V modification for the screen.)
Any advice on what to do to get this working?
As a frame of reference I have tried two different screens. A brand new one just taken out of the box, and an identical model variation 13 that I had successfully wired and had running on a raspberry pi 3 B+ (Long story, didn't initially know it wouldn't fit.)
With that logic, either or both of the P10W are faulty, or the most recent image of retropie on The Zero and 1 for it is suffereing problems. Any advice?
Who is online
Users browsing this forum: No registered users and 1 guest