Page 8 of 13
Re: How To - Build the PRS-Tech SNES-Zero
Posted: Thu Aug 03, 2017 8:14 pm
by Domshen
I got everything soldered and set up including the custom button script but my up button and b button are not working. I did continuity testing and there does not seem to be any shorts. If I plug in a keyboard the up and b button work fine so I do not think that it's a software issue. The odd think is that I can not get continuity from the pad on the board header to the pad on the button interface for either up or b.
I'm thinking about running a wire from the pi to the button pad on the front of the controller board. Will that work?
Re: How To - Build the PRS-Tech SNES-Zero
Posted: Tue Aug 15, 2017 10:16 am
by MeisterAndre
Hi,
did anyone tried to install recalbox/batocera image on the Snes Zero? Had Retropie working, but i dont like that os. I already have a pi3 with Recalbox, so that would be easier for me.
Tried recalbox and activatet gpio controller, but it doesnt work, only 2 buttons or so are working.Perhaps anyone had the same problems and solved it.
Regards
Andre
Re: How To - Build the PRS-Tech SNES-Zero
Posted: Fri Aug 18, 2017 12:37 am
by Oldnck
Would it be possible to use a wireless Bluetooth controller as a second player????
Re: How To - Build the PRS-Tech SNES-Zero
Posted: Fri Aug 18, 2017 4:32 am
by Billy Blaze
Oldnck wrote: ↑Fri Aug 18, 2017 12:37 am
Would it be possible to use a wireless Bluetooth controller as a second player????
prerunnerseth wrote: ↑Tue Apr 25, 2017 10:19 pm
Billy Blaze wrote: ↑Tue Apr 25, 2017 12:25 pm
quick question:
does the HDMI solution provide enough power to support the build-in bluetooth thingy, in order to connect a second bluetooth controller?
Yes it does.
Re: How To - Build the PRS-Tech SNES-Zero
Posted: Fri Aug 18, 2017 2:54 pm
by Racerboy
Oldnck wrote: ↑Fri Aug 18, 2017 12:37 am
Would it be possible to use a wireless Bluetooth controller as a second player????
Yes, that's what I do with my 8bitdo NES30 Pro and SNES-Zero.
Racerboy wrote: ↑Thu Jun 22, 2017 3:05 pm
When you add a second player, you need to go into retroarch and configure it there.
Launch a game on the system that you want to configure the controls on, and go to Settings>Input>Input User 2 Binds and configure it there, that worked for my bluetooth controller anyway.
Re: How To - Build the PRS-Tech SNES-Zero
Posted: Sat Aug 19, 2017 9:17 pm
by mashinboo
Is it possible to book the HDMI 5v to a power boost 100c instead of the pi and then connect the power boost to the pi instead to introduce lipo battery backup capabilities ?
Re: How To - Build the PRS-Tech SNES-Zero
Posted: Wed Aug 23, 2017 3:52 am
by Oldnck
Has anybody got pictures of adding the external micro USB port? How it's attached and such?
Re: How To - Build the PRS-Tech SNES-Zero
Posted: Wed Aug 23, 2017 5:13 am
by RogerX
mashinboo wrote: ↑Sat Aug 19, 2017 9:17 pm
Is it possible to book the HDMI 5v to a power boost 100c instead of the pi and then connect the power boost to the pi instead to introduce lipo battery backup capabilities ?
Where in the world are you going to fit a Powerboost and a battery? In a new box you build on the TV end?
Re: How To - Build the PRS-Tech SNES-Zero
Posted: Wed Aug 23, 2017 6:27 pm
by prerunnerseth
Oldnck wrote: ↑Wed Aug 23, 2017 3:52 am
Has anybody got pictures of adding the external micro USB port? How it's attached and such?
i just built one with the micro usb port. ill post some tomorrow.
Re: How To - Build the PRS-Tech SNES-Zero
Posted: Thu Aug 24, 2017 1:20 am
by Eccho
prerunnerseth wrote: ↑Wed Aug 23, 2017 6:27 pm
Oldnck wrote: ↑Wed Aug 23, 2017 3:52 am
Has anybody got pictures of adding the external micro USB port? How it's attached and such?
i just built one with the micro usb port. ill post some tomorrow.
Thanks, I was curious about it as well!