Correct, you only get one channel through the speaker with this setup. One would need to wire another speaker to get stereo output through the speakers.Helder wrote:Stereo always goes to the headphone but since you have 1 MONO speaker you get one channel since it is Mono. What is wrong with this setup? I don't understand what you're trying to say with that post.PotaTox wrote:But with your current setup, only 1 channel gets played, left or right.jeffy1021 wrote: no headphones plugged in - audio goes into the jack and out to the speaker
[GUIDE] Wiring Diagrams: all-in-one board, graceful shutdowns, audio-only board
Re: [GUIDE] Diagrams to wire a GBZ with all-in-one board and graceful shutdowns
Re: [GUIDE] Diagrams to wire a GBZ with all-in-one board and graceful shutdowns
But how do you get a stereo mix then?
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: [GUIDE] Diagrams to wire a GBZ with all-in-one board and graceful shutdowns
Try this:PotaTox wrote:But how do you get a stereo mix then?
http://www.stufinnis.co.uk/stereotomono.html
omit one of the Mono outputs in that diagram.
Also:
https://youtu.be/UDkrE4swJhc?t=1m46s
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: [GUIDE] Diagrams to wire a GBZ with all-in-one board and graceful shutdowns
has anyone followed the DMG diagram and got the audio to work with the AIO board? I'm kind of confused by looking at the diagram and comparing to Felders guide
Felder's Guide
http://www.sudomod.com/forum/viewtopic.php?f=22&t=701
Felder's Guide
http://www.sudomod.com/forum/viewtopic.php?f=22&t=701
Re: [GUIDE] Diagrams to wire a GBZ with all-in-one board and graceful shutdowns
Do I need resistors? And if so, how many ohms?Helder wrote:Try this:PotaTox wrote:But how do you get a stereo mix then?
http://www.stufinnis.co.uk/stereotomono.html
omit one of the Mono outputs in that diagram.
Also:
https://youtu.be/UDkrE4swJhc?t=1m46s
Re: [GUIDE] Diagrams to wire a GBZ with all-in-one board and graceful shutdowns
What about it is confusing to you? I haven't been able to test the DMG setup yet but I'm pretty confident in what's there.hueblo wrote:has anyone followed the DMG diagram and got the audio to work with the AIO board? I'm kind of confused by looking at the diagram and comparing to Felders guide
Felder's Guide
http://www.sudomod.com/forum/viewtopic.php?f=22&t=701
My wiring diagrams and schematics for Helder's boards and graceful shutdowns.
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: [GUIDE] Diagrams to wire a GBZ with all-in-one board and graceful shutdowns
The image is really simple to follow, you connect the speaker red wire to the headphone jack and not the Speaker + pad.hueblo wrote:has anyone followed the DMG diagram and got the audio to work with the AIO board? I'm kind of confused by looking at the diagram and comparing to Felders guide
Felder's Guide
http://www.sudomod.com/forum/viewtopic.php?f=22&t=701
Come on guys pay attention to the guides and videos. Yes the video uses 10k ohm resistors from the Left and Right and tie them to the Mono output to the speaker.PotaTox wrote: Do I need resistors? And if so, how many ohms?
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: [GUIDE] Diagrams to wire a GBZ with all-in-one board and graceful shutdowns
But one guide used 10k ohm, and the other used 680 ohm.Helder wrote:Come on guys pay attention to the guides and videos. Yes the video uses 10k ohm resistors from the Left and Right and tie them to the Mono output to the speaker.
Re: [GUIDE] Diagrams to wire a GBZ with all-in-one board and graceful shutdowns
I just wanted to confirm that the diagram is correct since I hooked it up just like the diagram and my AIO was no longer detected after that. I disconnected and it was detected again, but that can be attributed to the other issues I'm having. I just noticed that I also hooked it up without desoldering the headphone jack as Felder indicated (my mistake, I just cut out the portion of the board). I will try again tonight.
@a3k4
@helder
@a3k4
@helder
Last edited by hueblo on Wed Aug 10, 2016 3:43 pm, edited 1 time in total.
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: [GUIDE] Diagrams to wire a GBZ with all-in-one board and graceful shutdowns
I was showing options but 10k is the best option.PotaTox wrote:But one guide used 10k ohm, and the other used 680 ohm.Helder wrote:Come on guys pay attention to the guides and videos. Yes the video uses 10k ohm resistors from the Left and Right and tie them to the Mono output to the speaker.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Who is online
Users browsing this forum: No registered users and 1 guest