Page 1 of 1

Overclocking SD Card speed

Posted: Thu Apr 20, 2017 2:22 pm
by McGyver
Sorry if this topic is already known...

Do you aware that a Ultra High Speed (UHS) mode on SD cards is not used by default on the raspberry PI?
The SD card access speed needs to be "overclocked". Take care: not all SD cards support this. In this case you can reduce the setting until it works...

I got Sandisk extreme pro running on 100MHz but Samsung EVO didn`t work on that speed even if it is listed as UHS-I.

Follow this link and scroll down to the chapter "Storage Overclocking"
https://github.com/retropie/retropie-se ... erclocking

Re: Overclocking SD Card speed

Posted: Thu Apr 20, 2017 2:44 pm
by wermy
McGyver wrote:
Thu Apr 20, 2017 2:22 pm
Sorry if this topic is already known...

Do you aware that a Ultra High Speed (UHS) mode on SD cards is not used by default on the raspberry PI?
The SD card access speed needs to be "overclocked". Take care: not all SD cards support this. In this case you can reduce the setting until it works...

I got Sandisk extreme pro running on 100MHz but Samsung EVO didn`t work on that speed even if it is listed as UHS-I.

Follow this link and scroll down to the chapter "Storage Overclocking"
https://github.com/retropie/retropie-se ... erclocking
Interesting, thanks for sharing! Have you seen any noticeable performance gains in things like boot-time, etc?

Re: Overclocking SD Card speed

Posted: Thu Apr 20, 2017 3:09 pm
by McGyver
Honestly not a lot... I started booting both of my builds on the same time. One on 100MHz, the other on 83MHz. The 100 MHz Version was maybe 2-3 sec. faster in booting. My conclusion: don`t spent so much in high speed expensive SD cards if you aspect a huge increase in speed.