Hello sudomod!
I've recently bought this LCD:
https://www.tme.eu/gb/details/dem320240 ... -tmh-pw-n/
I want to connect it to the Raspberry PI Zero directly over SPI Interface. The LCD Interface documentation says: "SPI+8/9/16Bit-MCU+18-Bit-RGB". I know that I should something like LED Driver to give current to the LCD Backlight, but, what's more? Can I just connect corresponding SPI pins from LCD to Raspberry PI?
Best regards
Peter
320x240 TFT Display Over SPI to Raspberry
Re: 320x240 TFT Display Over SPI to Raspberry
On the "Technical Information" tab there's a link to PDF https://www.tme.eu/gb/Document/6746c8b1 ... H-PW-N.pdf, which mentions Solomon SSD2119 connector being used. Searching around at https://www.raspberrypi.org/forums/view ... p?t=112055 suggests that SSD2119 would be workable with https://github.com/notro/fbtft and https://github.com/tasanakorn/rpi-fbcp combo.
The image on the page only shows a ZIF/surface ribbon cable connection - is that all the display comes with, or are you able to connect the SPI pins of the SSD2119 physically to Rasberry Pi? If so, then that might be all that's needed, and then setting up fbtft+rpi-fbcp combo might be able to work.
The image on the page only shows a ZIF/surface ribbon cable connection - is that all the display comes with, or are you able to connect the SPI pins of the SSD2119 physically to Rasberry Pi? If so, then that might be all that's needed, and then setting up fbtft+rpi-fbcp combo might be able to work.
Who is online
Users browsing this forum: No registered users and 1 guest