Page 1 of 1

Wiring a Pi Zero to a Pitft 2.8" screen help

Posted: Wed Mar 07, 2018 8:40 pm
by phillymadison
Hi all I apologize if this was asked before and if I'm posting in the wrong section.

I want to connect a pi zero to adafruit's 2.8" pitft screen https://www.adafruit.com/product/1601

I don't want to plug the pi into the back of the screen but run wires from the screen to the pi zero. Is there a web page or video that shows the correct spots to solder the wires to? Or do I just have to solder the 26 pins to the corresponding spots on the pi via the wires? And if so which 26?

Thanks in advance

Re: Wiring a Pi Zero to a Pitft 2.8" screen help

Posted: Thu Jul 12, 2018 10:34 am
by Ampersand
I did this a couple years ago, here's my (probably unclear) wiring diagram:
IMG_6070.JPG
IMG_6070.JPG (1.66 MiB) Viewed 1694 times
It's the pins with orange dots

I don't know if all 9 wires are needed, but it worked