Teensy 3.2 help

Arduino-related hardware discussion (including Teensy and other Arduino clones)
Post Reply
KEISLERBRITT
Posts: 3
Joined: Sun Oct 16, 2016 12:12 pm

Teensy 3.2 help

Post by KEISLERBRITT » Fri Oct 28, 2016 7:47 pm

I bought a teensy 3.2 thinking it was the teensy Lc. Is there any difference or will the sketches for the Lc work on the 3.2? Any help would be greatly appreciated!

Manimod
Posts: 5
Joined: Sun Mar 12, 2017 3:38 am
Has thanked: 1 time

Re: Teensy 3.2 help

Post by Manimod » Mon Apr 17, 2017 5:06 am

I used the teensy 3.2 for my un compleate pi3 retropie gameboy. Just open Wermy's ino sketch with Arduino 1.8.2 (make sure you also installed Teensyduino too), then select the right bord in the tools menu e.g teensy 3.2 and then select keyboard mouse gamepad. Verify with check button and then upload yur sketch. This has worked for me but for some reason, the game controller will only work in retropie menue and not in emulator mode unless you disconnected and re-connected the teensy usb. Then you may or may not encounter the problem of the left button being automatically pressed. But you maybhave more luck then me? Thats the only advice I have but im sure there are more helpful people on this forum.. right?

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests