Thanks for pointing out, I've swapped the USB pins and now it's only recognized as a USB HUB. I have no possibility to install another driver. What am I still doing wrong? Thank you in advanceVeteranGamer wrote: ↑Sun Dec 23, 2018 10:55 am
have you had a look here....
https://sudomod.com/forum/viewtopic.php?f=52&t=1185
there's a high chance this has been covered and hopefully resolved there.....
.
How to Program Helder's All in One GBZ PCB with Arduino IDE
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
So it shows up as a usb hub? the nthat part is working but nothing else is showing up? like does it show a Leonardo USB GamePad? also where did you buy the board from? I haven't sold these in well over a year but RGN has been selling them and if you got them from him I'd ask for an exchange if the Atmega32u4 is not being recognized.
Might want to invest in a cheap $4 USBasp programmer to reprogram the MCU if it needs it.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
hello helder, I have the board directly from you (2017) ... that's all a while ago, I had a few private problems and often have to pause. yes you are right, only the usb hub is detected no gamepad or sound card. ... how big is the chance that it works with the programmer, then I buy me such a thingHelder wrote: ↑Fri Dec 28, 2018 11:39 am
So it shows up as a usb hub? the nthat part is working but nothing else is showing up? like does it show a Leonardo USB GamePad? also where did you buy the board from? I haven't sold these in well over a year but RGN has been selling them and if you got them from him I'd ask for an exchange if the Atmega32u4 is not being recognized.
Might want to invest in a cheap $4 USBasp programmer to reprogram the MCU if it needs it.
thank you
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
Worth a shot and the programmer can be used for other boards that have similar arduino chips so it's not a waste of money.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
Hello everybody, I get this error. Is the board broken now, or do I have a chance to repair it?
BTW, Happy New Year
BTW, Happy New Year
- Attachments
-
- failure.JPG (112.68 KiB) Viewed 10723 times
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
You sure you have it connected properly to the board? also hit the detect button first to see if it detects the atmega chip or not. If you wire it wrong then you may have damaged it especially if it was working at one time.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Who is online
Users browsing this forum: No registered users and 1 guest