How to Program Helder's All in One GBZ PCB with Arduino IDE

Discussion about other hardware (including other Pi-like boards)
User avatar
Helder
Trailblazer
Trailblazer
Posts: 2985
Joined: Thu May 05, 2016 8:33 am
Location: Rogers, AR
Has thanked: 1459 times
Been thanked: 3114 times

Re: How to Program Helder's All in One GBZ PCB with Arduino IDE

Post by Helder » Mon May 01, 2017 12:36 pm

Use the code I added in his guide as some of the buttons on his code were not used in my code so a few buttons are not wired in code.
Chat with me and other members On Discord

Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.


Helder's Game Tech Website

We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.

User avatar
GameBoyMaster
Posts: 31
Joined: Fri Mar 03, 2017 7:09 pm
Has thanked: 3 times
Been thanked: 2 times

Re: How to Program Helder's All in One GBZ PCB with Arduino IDE

Post by GameBoyMaster » Sun Jan 21, 2018 3:16 pm

Hey, Is there a way that I could do this without the the pin header, because I'm not clear on how I'd do it otherwise

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2985
Joined: Thu May 05, 2016 8:33 am
Location: Rogers, AR
Has thanked: 1459 times
Been thanked: 3114 times

Re: How to Program Helder's All in One GBZ PCB with Arduino IDE

Post by Helder » Tue Jan 23, 2018 10:53 pm

You just need to solder a usb wire like I already told you in the other thread then use a wire to touch the reset pin on the 6pin header holes to a GND to initiate a reset.
Chat with me and other members On Discord

Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.


Helder's Game Tech Website

We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.

User avatar
GameBoyMaster
Posts: 31
Joined: Fri Mar 03, 2017 7:09 pm
Has thanked: 3 times
Been thanked: 2 times

Re: How to Program Helder's All in One GBZ PCB with Arduino IDE

Post by GameBoyMaster » Wed Jan 24, 2018 1:07 am

Oh ok so the pin header just makes it easier

DalThePal
Posts: 4
Joined: Wed Oct 11, 2017 2:46 pm

Re: How to Program Helder's All in One GBZ PCB with Arduino IDE

Post by DalThePal » Thu Feb 15, 2018 11:46 pm

I'm having trouble installing the sparkfun driver. My computer recognizes that its plugged in but doesn't show it as a controller. I updated the drivers and directed it to the files given but it says everything is up to date but still doesn't show the sparkfun pro micro. Should I just continue to the next step or am I missing something?

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2985
Joined: Thu May 05, 2016 8:33 am
Location: Rogers, AR
Has thanked: 1459 times
Been thanked: 3114 times

Re: How to Program Helder's All in One GBZ PCB with Arduino IDE

Post by Helder » Tue Feb 20, 2018 11:16 pm

If you're using my board then unless it's one of very older black boards there is no more sparkfun driver/bootloader used so you should choose the 5v Leonardo as your board.
Chat with me and other members On Discord

Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.


Helder's Game Tech Website

We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.

thief122
Posts: 7
Joined: Thu Dec 22, 2016 9:25 pm

Re: How to Program Helder's All in One GBZ PCB with Arduino IDE

Post by thief122 » Tue Aug 21, 2018 4:40 pm

Helder! The pics in this are not showed up. I want to programme my AIO board. Please help~

Macx
Posts: 16
Joined: Mon Mar 13, 2017 9:01 am
Has thanked: 2 times
Been thanked: 4 times

Re: How to Program Helder's All in One GBZ PCB with Arduino IDE

Post by Macx » Sat Dec 22, 2018 2:13 am

SwingeyP wrote:
Sat Aug 13, 2016 9:09 am
Hello @Helder,

Ok.

I reconnected the USB lead as I had originally and hooked it up to my Win10 PC.

All I see is the USB Not recognised error message popup and the device shown as :

'Unknown USB Device (Port Reset Failed)' in the Universal Serial Bus Controllers list.

I have tried swapping the white and green wires but when I do this nothing is detected at all (makes sense)

So, nothing detected by the Win10 PC.

IMG_3405.JPG
Hello everybody, I have exactly the same problem. Was this a solution found? Thanks and best regards

Macx
Posts: 16
Joined: Mon Mar 13, 2017 9:01 am
Has thanked: 2 times
Been thanked: 4 times

Re: How to Program Helder's All in One GBZ PCB with Arduino IDE

Post by Macx » Sun Dec 23, 2018 12:57 am

Macx wrote:
Sat Dec 22, 2018 2:13 am
SwingeyP wrote:
Sat Aug 13, 2016 9:09 am
Hello @Helder,

Ok.

I reconnected the USB lead as I had originally and hooked it up to my Win10 PC.

All I see is the USB Not recognised error message popup and the device shown as :

'Unknown USB Device (Port Reset Failed)' in the Universal Serial Bus Controllers list.

I have tried swapping the white and green wires but when I do this nothing is detected at all (makes sense)

So, nothing detected by the Win10 PC.

IMG_3405.JPG
Hello everybody, I have exactly the same problem. Was this a solution found? Thanks and best regards
hey, can nobody help me? 😔

User avatar
VeteranGamer
Posts: 1738
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 528 times
Been thanked: 909 times

Re: How to Program Helder's All in One GBZ PCB with Arduino IDE

Post by VeteranGamer » Sun Dec 23, 2018 10:55 am

Macx wrote:
Sun Dec 23, 2018 12:57 am
Macx wrote:
Sat Dec 22, 2018 2:13 am
SwingeyP wrote:
Sat Aug 13, 2016 9:09 am
Hello @Helder,

Ok.

I reconnected the USB lead as I had originally and hooked it up to my Win10 PC.

All I see is the USB Not recognised error message popup and the device shown as :

'Unknown USB Device (Port Reset Failed)' in the Universal Serial Bus Controllers list.

I have tried swapping the white and green wires but when I do this nothing is detected at all (makes sense)

So, nothing detected by the Win10 PC.

IMG_3405.JPG
Hello everybody, I have exactly the same problem. Was this a solution found? Thanks and best regards
hey, can nobody help me? 😔


have you had a look here....

https://sudomod.com/forum/viewtopic.php?f=52&t=1185

there's a high chance this has been covered and hopefully resolved there.....



.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest