sudomod

Hi,
in the first part of the video i heard i should post and ask for info if the motherboard of the bhought screen is not the same.
Here is the board, i think i've found the right pin, but i prefer to ask you for confirm...

I have the same board, which pin do you think is the right one? I can find the regulator that wermy soldered to in his video as it has the exact same text printed on it but I'm not quite sure which pin needs to be soldered to on that regulator.
EDIT: nvm I didn't see that you marked the pin, I think it's the same pin too, however im not very well versed in this kind of stuff.

I'm pretty sure the pin is the right one. I powered on the screen at 12v and used a tester to see the voltage at this pin, it has 5v.
In the next days i'm going to assembly all the staff...i'll let you know.

I have the same board and just tried it. It´s the pin you´ve marked in your picture.

Just soldered up the connection on mine, second confirmation that it works! and much less flickering/noise too.

Thanks guys!