[FOR SALE] microSD-to-Cartridge Breakout Boards aka 'kk_gb_zero' [WORLDWIDE]

Completed sale threads will be moved here to keep things tidy in the main For Sale forum.
User avatar
kitsch-bent
Posts: 93
Joined: Tue May 10, 2016 4:15 pm
Has thanked: 31 times
Been thanked: 20 times

[FOR SALE] microSD-to-Cartridge Breakout Boards aka 'kk_gb_zero' [WORLDWIDE]

Post by kitsch-bent » Tue May 24, 2016 8:33 pm

arrived yesterday, more sockets should be arriving tomorrow. so, these are good to go! rev. b (kk_gb_zero_b) will be arriving in the next day or two which has the socket along the edge to use with shells which have a slot cut out in them, but personally I'm fond of this with a half-front shell because I can remove the card easily and just let the cartridge stay in place.

anywho.... enjoy! there are different pricing options in the drop-down menu depending on how you order these.

http://store.kitsch-bent.com/product/kk_gb_zero_a

Image

Image

Image

Image

Image

http://store.kitsch-bent.com/product/kk_gb_zero_a
its full of Game Boy Zero stuff!!! -----> -----> -----> http://store.kitsch-bent.com

(^_^) *(^_^)* (^_^) >*(^_^)*< (^_^) *(^_^)* (^_^)

Image

User avatar
tanooki
Posts: 11
Joined: Fri May 06, 2016 7:16 am
Has thanked: 2 times
Been thanked: 2 times

Re: [FOR SALE] microSD-to-Cartridge Breakout Boards aka 'kk_gb_zero' [WORLDWIDE]

Post by tanooki » Sat May 28, 2016 6:24 pm

kitsch-bent wrote: rev. b (kk_gb_zero_b) will be arriving in the next day or two which has the socket along the edge to use with shells which have a slot cut out in them
rev a is tempting, but I'm holding out for rev b. Do you expect it will be available soon? Thanks.

User avatar
kitsch-bent
Posts: 93
Joined: Tue May 10, 2016 4:15 pm
Has thanked: 31 times
Been thanked: 20 times

Re: [FOR SALE] microSD-to-Cartridge Breakout Boards aka 'kk_gb_zero' [WORLDWIDE]

Post by kitsch-bent » Sat May 28, 2016 9:23 pm

tanooki wrote:
kitsch-bent wrote: rev. b (kk_gb_zero_b) will be arriving in the next day or two which has the socket along the edge to use with shells which have a slot cut out in them
rev a is tempting, but I'm holding out for rev b. Do you expect it will be available soon? Thanks.
should be arriving on monday, if FedEx is delivering regularly then (its a holiday monday here), and if not then, on tuesday. ready to go, otherwise! i don't do pre-orders as there is always the unforeseen thing to happen, and learned from past efforts. hiccups can pop up any time, so prefer to have stuff in-hand. they are on the way though :)
its full of Game Boy Zero stuff!!! -----> -----> -----> http://store.kitsch-bent.com

(^_^) *(^_^)* (^_^) >*(^_^)*< (^_^) *(^_^)* (^_^)

Image

User avatar
scbailey94
Posts: 61
Joined: Wed May 18, 2016 9:57 am
Has thanked: 18 times
Been thanked: 10 times
Contact:

Re: [FOR SALE] microSD-to-Cartridge Breakout Boards aka 'kk_gb_zero' [WORLDWIDE]

Post by scbailey94 » Sun May 29, 2016 7:20 pm

Hi, just about to order one of these but have a couple of questions. Does this work the same as wermys guide but I won't have to do any soldering? Also can you recommend any LOCA glue as I was going to order 2 front light kits for the GBC? Thanks @kitsch-bent
Check out my Instagram www.instagram.com/sb.retromods/ to see more of my Game Boy Zero builds :D

User avatar
mrdude42
Posts: 96
Joined: Sun May 15, 2016 10:04 am
Location: New York City
Has thanked: 290 times
Been thanked: 29 times
Contact:

Re: [FOR SALE] microSD-to-Cartridge Breakout Boards aka 'kk_gb_zero' [WORLDWIDE]

Post by mrdude42 » Sun May 29, 2016 10:29 pm

I oredered a rev A! Looking forward to try an Rev B too when it comes available.
Last edited by mrdude42 on Sun May 29, 2016 11:12 pm, edited 1 time in total.

User avatar
kitsch-bent
Posts: 93
Joined: Tue May 10, 2016 4:15 pm
Has thanked: 31 times
Been thanked: 20 times

Re: [FOR SALE] microSD-to-Cartridge Breakout Boards aka 'kk_gb_zero' [WORLDWIDE]

Post by kitsch-bent » Sun May 29, 2016 11:02 pm

scbailey94 wrote:Hi, just about to order one of these but have a couple of questions. Does this work the same as wermys guide but I won't have to do any soldering? Also can you recommend any LOCA glue as I was going to order 2 front light kits for the GBC? Thanks @kitsch-bent
the pinout diagram is the last pic. it hooks up in the same manner as wermys guide, if not the same pinout, but thats not too hard to change. you'll find the solder connections are easily accessible with this and placed in way to be easy to solder to. just follow the pinout diagram and match it to the connections for the sd card itself.

osaka brand LOCA is what gets the best reviews, from customers and online, but just make sure you buy the real stuff. there are a lot of fake Osaka tubes floating around out there, both in shops which are unaware of this and especially on alibaba/aliexpress. it will cost a bit more, but its best to get the right stuff and get a good result than waste a lesser amount of money on a product not worth using. the cheap types are not worth the money.
its full of Game Boy Zero stuff!!! -----> -----> -----> http://store.kitsch-bent.com

(^_^) *(^_^)* (^_^) >*(^_^)*< (^_^) *(^_^)* (^_^)

Image

User avatar
kitsch-bent
Posts: 93
Joined: Tue May 10, 2016 4:15 pm
Has thanked: 31 times
Been thanked: 20 times

Re: [FOR SALE] microSD-to-Cartridge Breakout Boards aka 'kk_gb_zero' [WORLDWIDE]

Post by kitsch-bent » Thu Jun 02, 2016 8:40 pm

the rev.b boards arrived yesterday, finally had time to take some photos and test one today. so, up in the shop now, for your perusal...

http://store.kitsch-bent.com/product/kk_gb_zero_b

Image
Image
Image
Image
Image


http://store.kitsch-bent.com/product/kk_gb_zero_b
its full of Game Boy Zero stuff!!! -----> -----> -----> http://store.kitsch-bent.com

(^_^) *(^_^)* (^_^) >*(^_^)*< (^_^) *(^_^)* (^_^)

Image

User avatar
Ganreizu
Posts: 565
Joined: Thu May 05, 2016 8:20 am
Has thanked: 181 times
Been thanked: 106 times

Re: [FOR SALE] microSD-to-Cartridge Breakout Boards aka 'kk_gb_zero' [WORLDWIDE]

Post by Ganreizu » Fri Jun 03, 2016 7:27 am

kitsch-bent wrote:the rev.b boards arrived yesterday, finally had time to take some photos and test one today. so, up in the shop now, for your perusal...

[spoiler="huzzah"]http://store.kitsch-bent.com/product/kk_gb_zero_b[/spoiler]


http://store.kitsch-bent.com/product/kk_gb_zero_b
Ordered! :] Thank you~

Jack
Posts: 15
Joined: Thu May 05, 2016 9:43 am
Location: Belgium
Been thanked: 2 times

Re: [FOR SALE] microSD-to-Cartridge Breakout Boards aka 'kk_gb_zero' [WORLDWIDE]

Post by Jack » Wed Jun 08, 2016 1:34 am

I have an old cartridge at home...if I order pcb only will I only need to cut out a little piece of my cartridge and plug in a a micro SD card to make it work?
In other words: will the little metal piece to plug the SD in be on it or do I still need to solder?

User avatar
joe7dust
Posts: 218
Joined: Mon Jun 06, 2016 4:13 am
Has thanked: 23 times
Been thanked: 7 times

Re: [FOR SALE] microSD-to-Cartridge Breakout Boards aka 'kk_gb_zero' [WORLDWIDE]

Post by joe7dust » Wed Jun 08, 2016 2:35 am

Jack wrote:I have an old cartridge at home...if I order pcb only will I only need to cut out a little piece of my cartridge and plug in a a micro SD card to make it work?
In other words: will the little metal piece to plug the SD in be on it or do I still need to solder?
Good question... if it is already attached I definitely applaud this seller for making it easy on us. I feel like adafruit is pretty slimy when it comes to that, they have a board that is required to get one of their displays connected (sold separately) and in the 3rd photo of it they show it with the proper ribbon cable connector attached. After asking to clarify they tell me it doesn't come attached. Who in the heck wants to solder 50 pins that are 0.5mm apart?! Pretty sure over half the buyers of that item ended up not even getting to use it.

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests