TCB's V3 Build Log (Complete!)
Posted: Tue Apr 23, 2019 3:48 pm
Hello!
I've actually been working on this project a little bit here and there lately, but haven't made a whole lot of progress since we had the issues with the PCBs. I figured it would be pretty boring to make a build log and then not post anything for a couple of weeks.
Now that we have news of the fixed boards being shipped out soon (thanks again, Helder!), I feel like a build log would be fun!
So here's my progress so far:
I got the Practice boards a few months ago, and this was my first soldering attempt. The connections are all fine but the soldering itself needs a little work.
A few weeks back I got my buttons and an awesome sticker (that I still need to find a place to put):
After I had the buttons, I could start printing my parts to see which color combos I liked best. First I tested my print settings with some cheap PLA.
Once I got the print settings right, I brainstormed some color combos. I'm using a blue tin, but I don't want an overly blue face plate. I decided on doing something interesting. For the first two layers I printed in the cheap white PLA. It's somewhat translucent, especially when it's that thin. After the first two layers I switched to blue PLA. This gives the main parts of the face plates a bluish hue, and the indented details (like the Pi Logo and the Buttons) are a deeper blue. I may reprint this with the fan disabled to get a smoother finish.
Update (5/7):
Received a nicely packaged box in the mail...
Now I have my fresh-from-the-supplier PCB and my battery, so now assembly can start when all the parts are gathered.
Otherwise, I finished another practice board, this time all of the connections check out with no issues, only thing is that I probably could have been fine using less solder as not all of the solder is flush with the board.
As I am typing this, I'm reprinting an experimental face plate. Instead of the white PLA I used before, this time I used a translucent PLA. I also disabled the cooling fans on my printer and slowed down the print speed to try and get a smoother finish. The different plastic could also make a more interesting finish (plus, I barely have any plastic left on that spool, so this print should finish it off).
Update (5/11):
The experimental faceplates I printed the other day ended up looking terrible, so i'm sticking with the ones I made first.
Otherwise, I pretty much have all of my materials gathered, so today I started putting this together!
Today, I faced the task of soldering. Following Wermy's guide to the smallest detail, everything went smoothly. No major issues, only a couple of spots needed to be gone over a second time to push the solder into the pads. My multi meter said that everything was OK, and after booting it up, this went pretty well.
(The fluffy-looking stuff is pieces of the alcohol-soaked tissue I used to soak up the flux)
Update (5/13)
Yesterday I finished everything up! A lot went as planned, but some didn't go quite as well.
Drilling and filing holes into my tin was probably the hardest and most tedious part of the build. Some of the holes are just a little bit off, and I got some annoying scratches from the files.
After that, assembly went very smoothly. I didn't have any VHB on hand, so I used hot glue to mount the base and the screen.
Then, a couple of screws finished everything off and it was time to put some games on it! The only pictures I took of it working were when it was transferring, so I don't have any game play images (yet).
I do only have one minor, but slightly aggravating issue. I forgot to add the magnet when I was putting the screen together, so I lost the ability for the auto-shutdown when the lid closes. Not a big issue at all, since I manually turn it off anyway, but I'll always know it's not there, and that's annoying. I guess I'll just save it for the next build...
Thanks again to Wermy and Helder for making this project possible, and to everyone else who gave support both in the project's production as well as build issues. Your work is heavily appreciated!
I've actually been working on this project a little bit here and there lately, but haven't made a whole lot of progress since we had the issues with the PCBs. I figured it would be pretty boring to make a build log and then not post anything for a couple of weeks.
Now that we have news of the fixed boards being shipped out soon (thanks again, Helder!), I feel like a build log would be fun!
So here's my progress so far:
I got the Practice boards a few months ago, and this was my first soldering attempt. The connections are all fine but the soldering itself needs a little work.
Practice Board #1Show
Buttons!Show
The Practice PrintsShow
FaceplatesShow
Faceplates with buttonsShow
Update (5/7):
Received a nicely packaged box in the mail...
Now I have my fresh-from-the-supplier PCB and my battery, so now assembly can start when all the parts are gathered.
Otherwise, I finished another practice board, this time all of the connections check out with no issues, only thing is that I probably could have been fine using less solder as not all of the solder is flush with the board.
As I am typing this, I'm reprinting an experimental face plate. Instead of the white PLA I used before, this time I used a translucent PLA. I also disabled the cooling fans on my printer and slowed down the print speed to try and get a smoother finish. The different plastic could also make a more interesting finish (plus, I barely have any plastic left on that spool, so this print should finish it off).
Update (5/11):
The experimental faceplates I printed the other day ended up looking terrible, so i'm sticking with the ones I made first.
Otherwise, I pretty much have all of my materials gathered, so today I started putting this together!
The StuffShow
Solder PointsShow
Update (5/13)
Yesterday I finished everything up! A lot went as planned, but some didn't go quite as well.
Drilling and filing holes into my tin was probably the hardest and most tedious part of the build. Some of the holes are just a little bit off, and I got some annoying scratches from the files.
Tin FrontShow
Tin SideShow
Tin BackShow
Then, a couple of screws finished everything off and it was time to put some games on it! The only pictures I took of it working were when it was transferring, so I don't have any game play images (yet).
Transferring...Show
All Working!Show
Thanks again to Wermy and Helder for making this project possible, and to everyone else who gave support both in the project's production as well as build issues. Your work is heavily appreciated!