Using a differnt Pi model
-
- Posts: 2
- Joined: Thu Aug 24, 2017 10:22 pm
Using a differnt Pi model
I was interested in the Minty Pi for a while now. Although it is impressive, it seems like it will be slow. Would the custom pcb for the minty pi work with a Raspberry Pi 3 Model B?
Re: Using a differnt Pi model
No.
More specifically, you might be able to fit the Pi3 to the PCB (though you'd have to strip one of the USB sockets, and may have a capacitor in the way), but it absolutely would not fit inside an Altoids tin if you do.
More specifically, you might be able to fit the Pi3 to the PCB (though you'd have to strip one of the USB sockets, and may have a capacitor in the way), but it absolutely would not fit inside an Altoids tin if you do.
-
- Posts: 2
- Joined: Thu Aug 24, 2017 10:22 pm
Re: Using a differnt Pi model
Thank you, I know it wouldn't fit in the altoids tin, but I was just intersed in making a modded mintypi with more power
-
- Posts: 3
- Joined: Wed Aug 09, 2017 8:48 pm
- Been thanked: 1 time
Re: Using a differnt Pi model
I soldered my usb's off and grinded down the corners of my pi 3 it fits just fine! sorry for posting in such an old thread.
Who is online
Users browsing this forum: No registered users and 1 guest