V3 20190501 Can't shutdown?

Having trouble with your mintyPi build? Post your questions here!
User avatar
gambino37
Posts: 217
Joined: Fri Oct 20, 2017 7:17 am
Has thanked: 4 times
Been thanked: 63 times

Re: V3 20190501 Can't shutdown?

Post by gambino37 » Mon Jun 03, 2019 10:59 am

NeonJesterface wrote:
Sat Jun 01, 2019 3:57 am
I'm completely stumped here, should I try and reflow anything? or try replacing the pi?
I have already replaced my pi, twice actually, problem remains. I have trouble shutting down with the button from time to time as well. Its weird as hell. When its powered on it works like a dream. Just shutting the damn thing off is a nightmare.

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2985
Joined: Thu May 05, 2016 8:33 am
Location: Rogers, AR
Has thanked: 1459 times
Been thanked: 3114 times

Re: V3 20190501 Can't shutdown?

Post by Helder » Mon Jun 03, 2019 1:19 pm

But wasn't your board the one you kind of messed up desoldering the wrong chip? It's likely something that got damaged with the process of desoldering. The board did look horrible when you did that so not sure what got damaged in the process.
Chat with me and other members On Discord

Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.


Helder's Game Tech Website

We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.

User avatar
gambino37
Posts: 217
Joined: Fri Oct 20, 2017 7:17 am
Has thanked: 4 times
Been thanked: 63 times

Re: V3 20190501 Can't shutdown?

Post by gambino37 » Mon Jun 03, 2019 1:22 pm

This is true.

NeonJesterface
Posts: 18
Joined: Thu Apr 04, 2019 5:26 pm
Has thanked: 3 times

Re: V3 20190501 Can't shutdown?

Post by NeonJesterface » Fri Jun 07, 2019 1:08 pm

LilTrublMakr wrote:
Sun Jun 02, 2019 3:01 pm
Just to make sure:

You are using the power board and off battery. When triggering the halls sensor, it goes through the process but does not cut the power? And the power button turns it on but won't turn it off when held?
This is all correct, I had the whole thing put together and yep, just wont finish the shutdown properly, I think its really weird that we're the only two people with this issue, with slightly different degrees of not shutting down

NeonJesterface
Posts: 18
Joined: Thu Apr 04, 2019 5:26 pm
Has thanked: 3 times

Re: V3 20190501 Can't shutdown?

Post by NeonJesterface » Fri Jun 07, 2019 1:12 pm

Helder wrote:
Mon Jun 03, 2019 1:19 pm
But wasn't your board the one you kind of messed up desoldering the wrong chip? It's likely something that got damaged with the process of desoldering. The board did look horrible when you did that so not sure what got damaged in the process.
I sent my board to you for desoldering and replacing the only thing that I've known was an issue. I mean I've desoldered and resoldered the shoulder button board a few times because I had it together before I had to send my power board, and then I had it attached at a funky angle, does that mean I might need to replace the same thing on the power board? Thats the only thing close enough I can think I could've damaged
EDIT: My mistake, didn't click in my head you were talking about their button pcb

User avatar
gambino37
Posts: 217
Joined: Fri Oct 20, 2017 7:17 am
Has thanked: 4 times
Been thanked: 63 times

Re: V3 20190501 Can't shutdown?

Post by gambino37 » Tue Jun 11, 2019 7:27 am

After some troubleshooting with a few different power boards (all in various stages of updating with the dualfets), Im pretty sure I have nailed down the cause of this. It seems as though they are not all the same. I have no idea what would make them different, but I bought a batch from Ebay https://www.ebay.com/itm/5pcs-SI4562DY- ... 2749.l2649 and every power board I update with this particular chip has the not shutting down problem. When I hook the controller board/pi combos to the power board that Wermy built, they all shut down just fine with both the hall sensor and button. I also hooked up all the combos to the old version of the power board (pre-dualfet swap), they also all shut down just fine both ways. I currently have a batch on the way from LilTrublMklr, which I think we are guaranteed will work. Ill swap them again when I get his and hopefully all is resolved.

User avatar
Helder
Trailblazer
Trailblazer
Posts: 2985
Joined: Thu May 05, 2016 8:33 am
Location: Rogers, AR
Has thanked: 1459 times
Been thanked: 3114 times

Re: V3 20190501 Can't shutdown?

Post by Helder » Thu Jun 13, 2019 6:18 am

Wonder if they somehow sent you the wrong ones? can you read the numbers on the ones you actually have? Maybe bad clones.
Chat with me and other members On Discord

Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.


Helder's Game Tech Website

We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.

User avatar
gambino37
Posts: 217
Joined: Fri Oct 20, 2017 7:17 am
Has thanked: 4 times
Been thanked: 63 times

Re: V3 20190501 Can't shutdown?

Post by gambino37 » Thu Jun 13, 2019 6:13 pm

All of my eBay batch look like this.
Image

User avatar
LilTrublMakr
Posts: 365
Joined: Sun Aug 05, 2018 6:39 am
Has thanked: 24 times
Been thanked: 120 times
Contact:

Re: V3 20190501 Can't shutdown?

Post by LilTrublMakr » Thu Jun 13, 2019 8:38 pm

That looks like 4582 instead of 4562 to me. That might be what is going on. You should have gotten the ones I sent by now.

User avatar
gambino37
Posts: 217
Joined: Fri Oct 20, 2017 7:17 am
Has thanked: 4 times
Been thanked: 63 times

Re: V3 20190501 Can't shutdown?

Post by gambino37 » Thu Jun 13, 2019 8:40 pm

Haven't gotten them yet. Hopefully tomorrow. Depends on which one you look at. Ok some the 6 is more clear.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest