[FOR SALE] Kelboy 2.0 CM3 lite Lemoncrest
Posted: Mon Sep 14, 2020 10:08 pm
I’m selling a complete kit assembled and working Kelboy 2.0 Cm3 lite Lemoncrest
Original Case
Technical data:
IPS screen
Visaton 8Ohm Speaker
Computer Module 3 Lite
5000mA battery
3D printing parts (Screen support)
A Kelboy2.0 with the following technical details:
HDMI connector (is disconnected)
HiFi sound via I2S
Mono Class DG Amplifier
Analog wheel for volume control
USB output By side
CM3L and CM3 compatibility
WiFi module via SDIO (WiFi 2.4 / 5Ghz up to 150Mbps, BL 4.0, 5.0 ... BLE ..)
USB C 3A charger
Fuel gauge built into Linux by I2C
Arduino Leonardo as joystick / Serial + MOD hotkey
Soft Shutdown to be executed by Software
RGB led to indicate status of (Charging, Charging and ACT led of the CM3, to see what works.
Availability in pins to be able to put a FAN.
Micro SD Push-Push reader, with this the SD is removed by pressure since it bounces with the spring it has internally
1Mega EEPROM.
https://shop.lemoncrest.com/index.php?i ... &id_lang=1
Original Case
Technical data:
IPS screen
Visaton 8Ohm Speaker
Computer Module 3 Lite
5000mA battery
3D printing parts (Screen support)
A Kelboy2.0 with the following technical details:
HDMI connector (is disconnected)
HiFi sound via I2S
Mono Class DG Amplifier
Analog wheel for volume control
USB output By side
CM3L and CM3 compatibility
WiFi module via SDIO (WiFi 2.4 / 5Ghz up to 150Mbps, BL 4.0, 5.0 ... BLE ..)
USB C 3A charger
Fuel gauge built into Linux by I2C
Arduino Leonardo as joystick / Serial + MOD hotkey
Soft Shutdown to be executed by Software
RGB led to indicate status of (Charging, Charging and ACT led of the CM3, to see what works.
Availability in pins to be able to put a FAN.
Micro SD Push-Push reader, with this the SD is removed by pressure since it bounces with the spring it has internally
1Mega EEPROM.
https://shop.lemoncrest.com/index.php?i ... &id_lang=1