[For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

Sell or trade things with other forum members!
Frigo
Posts: 43
Joined: Sat Feb 04, 2017 6:45 am
Has thanked: 3 times
Been thanked: 3 times

Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

Post by Frigo » Sun May 14, 2017 1:32 am

Just ordered two !!!

User avatar
silentjames
Posts: 98
Joined: Fri Jan 27, 2017 9:02 am
Location: Russia
Has thanked: 35 times
Been thanked: 32 times

Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

Post by silentjames » Sun May 14, 2017 11:22 am

Hello @prerunnerseth!
As I can see, you board has 10 connectors on the left side. Can I use them to put leds inside the cartridge, oк these connectors are necessary for any other purposes?

prerunnerseth
Posts: 279
Joined: Fri May 06, 2016 5:36 pm
Has thanked: 16 times
Been thanked: 229 times

Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

Post by prerunnerseth » Sun May 21, 2017 7:27 pm

silentjames wrote:
Sun May 14, 2017 11:22 am
Hello @prerunnerseth!
As I can see, you board has 10 connectors on the left side. Can I use them to put leds inside the cartridge, oк these connectors are necessary for any other purposes?
Thats what they are there for!

Frigo
Posts: 43
Joined: Sat Feb 04, 2017 6:45 am
Has thanked: 3 times
Been thanked: 3 times

Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

Post by Frigo » Mon May 22, 2017 7:01 am

I ordered 2 cart, but I recieved just one...

By the way, I'm interested to know how to put led on the conector.

Frigo
Posts: 43
Joined: Sat Feb 04, 2017 6:45 am
Has thanked: 3 times
Been thanked: 3 times

Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

Post by Frigo » Sat May 27, 2017 1:01 am

Recieved the second one! ;) thank you

User avatar
silentjames
Posts: 98
Joined: Fri Jan 27, 2017 9:02 am
Location: Russia
Has thanked: 35 times
Been thanked: 32 times

Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

Post by silentjames » Sat May 27, 2017 1:12 pm

Hey guys, I have a question about wiring. Following the wermy's guide, I've connected first, third, fifth and other pins to relevant PP-pins on the Pi Zero. But when I plug the cartridge with PRS board, Pi Zero doesn't start. No leds activity, nothing. When I put the microSD cart to Pi directly, it booted fine.
Someone in this thread described similar problem, but that was related to damaged microSD reader. Mine looks and fits right. I've discovered the forum and found the advice to keep the wires as short as possible - did it without any result. Also changed PP8 and PP8 pins to 3v3 and ground pins from GPIO - no result too.
What's wrong with my wiring?
SpoilerShow
Image
Image
Image

prerunnerseth
Posts: 279
Joined: Fri May 06, 2016 5:36 pm
Has thanked: 16 times
Been thanked: 229 times

Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

Post by prerunnerseth » Mon May 29, 2017 6:39 pm

silentjames wrote:
Sat May 27, 2017 1:12 pm
Hey guys, I have a question about wiring. Following the wermy's guide, I've connected first, third, fifth and other pins to relevant PP-pins on the Pi Zero. But when I plug the cartridge with PRS board, Pi Zero doesn't start. No leds activity, nothing. When I put the microSD cart to Pi directly, it booted fine.
Someone in this thread described similar problem, but that was related to damaged microSD reader. Mine looks and fits right. I've discovered the forum and found the advice to keep the wires as short as possible - did it without any result. Also changed PP8 and PP8 pins to 3v3 and ground pins from GPIO - no result too.
What's wrong with my wiring?
SpoilerShow
Image
Image
Image
The wires still seem pretty long. i would try to make them a little shorter. I'm not familiar with that connector.

User avatar
silentjames
Posts: 98
Joined: Fri Jan 27, 2017 9:02 am
Location: Russia
Has thanked: 35 times
Been thanked: 32 times

Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

Post by silentjames » Tue May 30, 2017 2:11 am

prerunnerseth wrote:
Mon May 29, 2017 6:39 pm
The wires still seem pretty long. i would try to make them a little shorter. I'm not familiar with that connector.
I uploaded the photo I've taken before the cutting wire. Now they are about 2 inches (or even less), but still not working.

Frigo
Posts: 43
Joined: Sat Feb 04, 2017 6:45 am
Has thanked: 3 times
Been thanked: 3 times

Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

Post by Frigo » Wed May 31, 2017 9:50 am

silentjames wrote:
Sat May 27, 2017 1:12 pm
Hey guys, I have a question about wiring. Following the wermy's guide, I've connected first, third, fifth and other pins to relevant PP-pins on the Pi Zero. But when I plug the cartridge with PRS board, Pi Zero doesn't start. No leds activity, nothing. When I put the microSD cart to Pi directly, it booted fine.
Someone in this thread described similar problem, but that was related to damaged microSD reader. Mine looks and fits right. I've discovered the forum and found the advice to keep the wires as short as possible - did it without any result. Also changed PP8 and PP8 pins to 3v3 and ground pins from GPIO - no result too.
What's wrong with my wiring?
SpoilerShow
Image
Image
Image
I've got excactly the same problem....

User avatar
SuperNova
Posts: 9
Joined: Tue May 30, 2017 2:44 pm
Has thanked: 3 times
Been thanked: 1 time

Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering

Post by SuperNova » Sun Jun 04, 2017 5:45 am

Ok, this will be my start on my own GBZero build.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest