[For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering
- Obese Daemon
- Posts: 11
- Joined: Sat Sep 17, 2016 4:48 pm
- Location: England
Re: [Pre-Order 3.0] PRS-Tech Micro SD Cart board with Advanced Filtering
This is great and I assume you will keep ordering as long as there is a demand?
Just thought before ordering i would asking if there are any plans/reworks for the project, Doesn't seem much you could change even but just thought I would ask first
Just thought before ordering i would asking if there are any plans/reworks for the project, Doesn't seem much you could change even but just thought I would ask first
-
- Posts: 279
- Joined: Fri May 06, 2016 5:36 pm
- Has thanked: 16 times
- Been thanked: 229 times
Re: [Pre-Order 3.0] PRS-Tech Micro SD Cart board with Advanced Filtering
I plan to keep ordering until demand goes away. I plan to keep inventory from now on or not have it be much more than a week til i have inventory again depending on how fast they get ordered.livinin82 wrote:Is this a limited time thing or if I wait a week or so will these still be available for order?
Re: [Pre-Order 3.0] PRS-Tech Micro SD Cart board with Advanced Filtering
so i wanted to double check, i have placed a order for this pcb and was just wondering if there is a pinout schematic? (i probably have missed it like a million times lol )
Re: [Pre-Order 3.0] PRS-Tech Micro SD Cart board with Advanced Filtering
It's on the second page twice.Aironax wrote:so i wanted to double check, i have placed a order for this pcb and was just wondering if there is a pinout schematic? (i probably have missed it like a million times lol )
Re: [Pre-Order 3.0] PRS-Tech Micro SD Cart board with Advanced Filtering
hmm should put it with the original post but thank youGanreizu wrote:It's on the second page twice.Aironax wrote:so i wanted to double check, i have placed a order for this pcb and was just wondering if there is a pinout schematic? (i probably have missed it like a million times lol )
it seems those pitcures refer to colours of wires when its a full pcb.... those pictures would be good for someone doing their own home made pcb with a sd card break out. but not for the full filtered pcb
is the first 7 from the left utilising 2 pins each ?
Re: [Pre-Order 3.0] PRS-Tech Micro SD Cart board with Advanced Filtering
I don't control that, unfortunately.Aironax wrote:hmm should put it with the original post but thank you
[spoiler="Was referring to this"][/spoiler]Aironax wrote:it seems those pitcures refer to colours of wires when its a full pcb.... those pictures would be good for someone doing their own home made pcb with a sd card break out. but not for the full filtered pcb
It's every other pin. You can see the wires on the filtered sd card board going to every other gold pin, so every other pin is used on the cartridge reader.Aironax wrote:is the first 7 from the left utilising 2 pins each ?
-
- Posts: 279
- Joined: Fri May 06, 2016 5:36 pm
- Has thanked: 16 times
- Been thanked: 229 times
Re: [Pre-Order 3.0] PRS-Tech Micro SD Cart board with Advanced Filtering
Contacted my manufacturer today and the boards are in assembly today. I should see them stateside by early next week. I will prepare the shipping materials for the first 100. The second batch ... order 100+ will be in no later than a week after.
Thanks,
PRS
Thanks,
PRS
-
- Posts: 97
- Joined: Wed May 04, 2016 10:04 pm
- Has thanked: 4 times
- Been thanked: 2 times
Re: [Pre-Order 3.0] PRS-Tech Micro SD Cart board with Advanced Filtering
Ganreizu wrote:This guy?musty_666 wrote:I'm interested, but you have a Wiring diagram of the pins?
http://i.imgur.com/4QrsX3O.jpg
Dude I believe this is why Im having problems listed here http://www.sudomod.com/forum/viewtopic.php?f=8&t=1495
So from the picture you linked It actually matters which pins from the reader go to the PI? I had thought as long as there is continuity from the SD cards to the cartridge reader pins it was Okay?
Any info would help thank you!
-
- Posts: 279
- Joined: Fri May 06, 2016 5:36 pm
- Has thanked: 16 times
- Been thanked: 229 times
Re: [Pre-Order 3.0] PRS-Tech Micro SD Cart board with Advanced Filtering
Orders 1-100 will be shipped this week and 100-200 should be within a week or so. I will update you guys as I have a more exact date. I appreciate your support and patience from one maker to another. Trying my hardest to get caught up and have inventory.
THanks,
PRS
THanks,
PRS
Who is online
Users browsing this forum: No registered users and 1 guest