Page 15 of 19
Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering
Posted: Sat Apr 08, 2017 9:11 am
by TheMaddModder
Ok someone has to help me out here. I have wired this thing every which way and still cant figure it out. Everything has gotten pretty beaten up since i did it so many times -- Can anyone point me in the right direction?
Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering
Posted: Sat Apr 08, 2017 11:35 am
by TheMaddModder
Forgot to include the important picture... Thanks in advance
- image3.JPG (1.24 MiB) Viewed 9127 times
Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering
Posted: Sun Apr 09, 2017 5:55 pm
by prerunnerseth
TheMaddModder wrote: ↑Sat Apr 08, 2017 11:35 am
Forgot to include the important picture... Thanks in advance
image3.JPG
Looks to me like you have two black wires connected to the same pad on the Pi Zero. looks like one should be PP16 and the other ground. they should not be connected to the same pad on the Pi Zero.
Nevermind... it looks like you have them wired correctly. .. Is PP5 a ground? if so, your wires may just be too long. They really need to be as short as possible.
Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering
Posted: Sun Apr 09, 2017 6:37 pm
by TheMaddModder
Thanks I will try shortening them and using a different GND point
Edit: That works Thanks.
Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering
Posted: Tue Apr 11, 2017 10:54 pm
by diabloroker
Received a warped cart because it was sent in a letter envelope with no bubble wrap or protection from machines or normal shipping conditions...
Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering
Posted: Wed Apr 12, 2017 5:36 am
by prerunnerseth
diabloroker wrote: ↑Tue Apr 11, 2017 10:54 pm
Received a warped cart because it was sent in a letter envelope with no bubble wrap or protection from machines or normal shipping conditions...
This is how i ship all of them. This is how i can offer shipping for so cheap. I have sent hundreds of these and only had a couple be damaged. I will send another today.
Thanks,
PRS
Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering
Posted: Tue May 02, 2017 5:15 am
by prerunnerseth
in Stock and shipping
Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering
Posted: Sun May 07, 2017 1:09 pm
by Sprockett
Can I put a micro usb in the same cart, pointing out at the top?
I have other plans for the contrast port, putting power at the top of the cartridge makes the most sense for my build...
Thanks
Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering
Posted: Mon May 08, 2017 5:58 pm
by prerunnerseth
Sprockett wrote: ↑Sun May 07, 2017 1:09 pm
Can I put a micro usb in the same cart, pointing out at the top?
I have other plans for the contrast port, putting power at the top of the cartridge makes the most sense for my build...
Thanks
That should work, but not sure if anyone has tried it yet.
Re: [For Sale] PRS-Tech Micro SD Cart board with Advanced Filtering
Posted: Sat May 13, 2017 1:24 am
by teddy.t56
Got mine in the mail today. Everything in good working condition.