[For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
Good news everyone!
I tested the SNES screen bracket with wells on Helder's latest board and it works just as good. The only thing is since there are four post on the bracket you obviously can't put the L1 and R1 buttons where Wermy did it in his build unless you want to remove the bottom post of the brackets which is doable. Also screen has to be mounted upside down and flipped in software which is no big deal. Everything else works great including the X and Y button holes which line up as I expected. Here is a photo.
I modified the top of this bracket because I plan on placing the L1 and R1 like I did with Kites build. I like them there because they are easy for me to use there plus they are on the same side of the board which means less wiring across the two halves.
I tested the SNES screen bracket with wells on Helder's latest board and it works just as good. The only thing is since there are four post on the bracket you obviously can't put the L1 and R1 buttons where Wermy did it in his build unless you want to remove the bottom post of the brackets which is doable. Also screen has to be mounted upside down and flipped in software which is no big deal. Everything else works great including the X and Y button holes which line up as I expected. Here is a photo.
I modified the top of this bracket because I plan on placing the L1 and R1 like I did with Kites build. I like them there because they are easy for me to use there plus they are on the same side of the board which means less wiring across the two halves.
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
hi,
sorry for the dump question but are there different sizes? I received the bracket from printing but seems too small. the screw holes do not fit together ;(
br
Platta
sorry for the dump question but are there different sizes? I received the bracket from printing but seems too small. the screw holes do not fit together ;(
br
Platta
- Billy Blaze
- Posts: 78
- Joined: Tue Sep 06, 2016 1:27 pm
- Location: Gnosticus IV
- Has thanked: 68 times
- Been thanked: 33 times
- Contact:
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
nope!
but it depends on the printer and the material you're using. and it seems that your material did just shrunk a bit. to prevent this phenomenon you (or your print service) might want to upscale the bracket before printing. I gave it +1% and it fits perfectly fine. normally your 3D print service should have advised you in such things...
my printed bracketShow
Billy Blaze wrote: ↑Thu Mar 16, 2017 10:37 amprinted mine. everything fits quite well. thanks again for this model!
Hacks & Homebrews: new games for good old consoles: sudomod.com/forum/viewtopic.php?f=5&t=3188
Configure Input for DOSBox: github.com/kiteretro/Circuit-Sword/wiki/Configure-Input-for-DOSBox
Configure Input for PICO-8: github.com/kiteretro/Circuit-Sword/wiki/Configure-input-for-PICO-8
Configure Input for DOSBox: github.com/kiteretro/Circuit-Sword/wiki/Configure-Input-for-DOSBox
Configure Input for PICO-8: github.com/kiteretro/Circuit-Sword/wiki/Configure-input-for-PICO-8
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
Thank you...will have a chat with them tomorrowBilly Blaze wrote: ↑Thu May 04, 2017 11:10 amnope!
but it depends on the printer and the material you're using. and it seems that your material did just shrunk a bit. to prevent this phenomenon you (or your print service) might want to upscale the bracket before printing. I gave it +1% and it fits perfectly fine. normally your 3D print service should have advised you in such things...
my printed bracketShowBilly Blaze wrote: ↑Thu Mar 16, 2017 10:37 amprinted mine. everything fits quite well. thanks again for this model!
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
Any of the common 3.5 inch LCD screen that are 320 x 240 in resolution. All the screens in the wiki are the same dimension its just the controller board that vary.
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
can anyone make PDF file with drill inserts 2d, that i could print 11mm cicles with center points on a4 paper ?
Re: HoolyHoo's AIO bracket for Kite's SAIO Board
Hi, i found this on the forum - not used it yet though
http://cpeb.co.uk/.Uploads/Front_holes_template.pdf
Remember to turn off shrink to fit etc before printing. Apologies to who designed the template, i cant remember who posted it originally.
Thanks
http://cpeb.co.uk/.Uploads/Front_holes_template.pdf
Remember to turn off shrink to fit etc before printing. Apologies to who designed the template, i cant remember who posted it originally.
Thanks
Who is online
Users browsing this forum: No registered users and 1 guest