[For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Sell or trade things with other forum members!
User avatar
sparkhusky
Posts: 9
Joined: Sun Nov 13, 2016 11:07 am
Location: Washington
Has thanked: 2 times
Been thanked: 2 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by sparkhusky » Tue Mar 07, 2017 3:10 pm

did you use any kind of base when printing, or did you print direct on the plate?

do you have to use the metal inserts?

User avatar
HoolyHoo
Posts: 728
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 724 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by HoolyHoo » Tue Mar 07, 2017 3:11 pm

Glyph wrote:Could you please point me to the brass inserts you bought, so I get ones with correct depht ?
Thank you very much
https://www.amazon.com/uxcell-M2x3mmx3- ... ss+inserts

Or you can order 100 from Aliexpress cheaper and mor quantity but well you know, 2 month later (SpongeBob voice) :D

Need to be very careful inserting them as they are tiny and too little heat will take too long and melt the entire post and too much heat will clog the threads. Best way I found to do it insert a 6mm m2 screw with the insert on. Make sure screw is screwed about 1 mm past insert. Screw in the screw to the post until brass insert touches the post. Now apply a soldering iron at about 700 F to top of screw vertically and slowly push it in until insert is flush with top of post. I used a chisel tip as it fits in the screw head. Wait for part to cool then unscrew the screw. Should look like my part above. :)

User avatar
HoolyHoo
Posts: 728
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 724 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by HoolyHoo » Tue Mar 07, 2017 3:26 pm

sparkhusky wrote:did you use any kind of base when printing, or did you print direct on the plate?

do you have to use the metal inserts?
I print straight on glass with just a touch of hairspray for adhesion. No brim or raft necessary.
Yes I do have the metal inserts. I posted a link.
mynarsu wrote:@HoolyHoo, are you willing to share the SW files with me/us, I want to edit them for the joystick and maybe some other features ;)
Sorry, not at this time. ;)

Glyph
Posts: 26
Joined: Thu Sep 29, 2016 3:13 pm
Has thanked: 17 times
Been thanked: 12 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by Glyph » Tue Mar 07, 2017 3:27 pm

Thank you for all your explanations and helpful tips.
To avoid shipping fees for my country, I'll go with aliexpress and wait. Waiting is kind of my favourite game since I started my build ;)

User avatar
Oxodao
Posts: 131
Joined: Wed Jun 01, 2016 11:35 am
Location: 127.0.0.1
Has thanked: 4 times
Been thanked: 30 times
Contact:

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by Oxodao » Tue Mar 07, 2017 4:03 pm

Sooo clean, can't wait to get this printed
Arduino sketch for the gamepad (Teensy replacement): http://github.com/oxodao/GBZGamepad

User avatar
BitTen
Posts: 30
Joined: Thu Jun 30, 2016 6:47 pm
Has thanked: 32 times
Been thanked: 7 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by BitTen » Tue Mar 07, 2017 5:04 pm

Are the inserts required? How many millimeter are they in length?

For the model, I'm assuming it is scaled in millimeter?

User avatar
HoolyHoo
Posts: 728
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 724 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by HoolyHoo » Tue Mar 07, 2017 5:08 pm

SudoNull wrote:Are the inserts required? How many millimeter are they in length?

For the model, I'm assuming it is scaled in millimeter?
They are definitely not required but since it is plastic we are dealing with, it will wear out faster if you are constantly unscrewing.

User avatar
TheDeviantZen
Posts: 89
Joined: Tue Feb 21, 2017 7:57 am
Location: Leiria, Portugal
Has thanked: 85 times
Been thanked: 23 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by TheDeviantZen » Wed Mar 08, 2017 6:24 am

So, we have to buy M2 screws to that threaded brasses. Which screw length do you recommend to work well with the Gameboy shell?

User avatar
HoolyHoo
Posts: 728
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 724 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by HoolyHoo » Wed Mar 08, 2017 6:32 am

TheDeviantZen wrote:So, we have to buy M2 screws to that threaded brasses. Which screw length do you recommend to work well with the Gameboy shell?
If you decide on the inserts then yes M2 screws are needed, the standard Gameboy ones that come with the case will not work as they are a different thread made for plastic. I had a bunch of 12mm length ones so I cut those down to the size I needed. Didn't measure it but I'm guessing about 6mm. If you forego the inserts then the standard included screws with the Gameboy case work just fine. :D

User avatar
mwx
Posts: 22
Joined: Sat Oct 29, 2016 11:03 pm
Has thanked: 5 times
Been thanked: 16 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by mwx » Wed Mar 08, 2017 8:46 am

Hi
Mynasru wrote:@HoolyHoo, are you willing to share the SW files with me/us, I want to edit them for the joystick and maybe some other features ;)
I have 'remastered' HoolyHoo fantastic work as an OpenSCAD model (because I wan't some changes too). Write me an PM if you are interested in.
Attachments
a.jpg
a.jpg (65.52 KiB) Viewed 5188 times

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest