[For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

Sell or trade things with other forum members!
User avatar
gilbertotron
Posts: 99
Joined: Mon Oct 24, 2016 10:07 am
Has thanked: 322 times
Been thanked: 25 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by gilbertotron » Wed Mar 08, 2017 8:58 am

Cool - maybe its just me, but what did you change?

DarkStar2k
Posts: 1
Joined: Mon Dec 05, 2016 3:23 pm

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by DarkStar2k » Wed Mar 08, 2017 9:46 am

Is it just me or do the button holes not line up? The marks I made on the case from the holes in the board are not centered to the holes on the bracket.

Also my screen is a little thicker than the bracket is designed for.

DarkStar2k

User avatar
HoolyHoo
Posts: 726
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 200 times
Been thanked: 723 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by HoolyHoo » Wed Mar 08, 2017 9:53 am

DarkStar2k wrote:Is it just me or do the button holes not line up? The marks I made on the case from the holes in the board are not centered to the holes on the bracket.

Also my screen is a little thicker than the bracket is designed for.

DarkStar2k
They line up perfect on my print, see pictures of first post. I mentioned printer and material tolerance so maybe there is that. Can you post pictures?

User avatar
mwx
Posts: 22
Joined: Sat Oct 29, 2016 11:03 pm
Has thanked: 5 times
Been thanked: 16 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by mwx » Wed Mar 08, 2017 9:55 am

gilbertotron wrote:Cool - maybe its just me, but what did you change?
The one on the picture is not yet changed.

User avatar
Funkenschuhster
Posts: 26
Joined: Mon Feb 06, 2017 6:54 am
Location: Germany
Has thanked: 8 times
Been thanked: 5 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by Funkenschuhster » Wed Mar 08, 2017 11:40 am

HoolyHoo wrote:
Glyph wrote:Could you please point me to the brass inserts you bought, so I get ones with correct depht ?
Thank you very much
https://www.amazon.com/uxcell-M2x3mmx3- ... ss+inserts

Or you can order 100 from Aliexpress cheaper and mor quantity but well you know, 2 month later (SpongeBob voice) :D

Need to be very careful inserting them as they are tiny and too little heat will take too long and melt the entire post and too much heat will clog the threads. Best way I found to do it insert a 6mm m2 screw with the insert on. Make sure screw is screwed about 1 mm past insert. Screw in the screw to the post until brass insert touches the post. Now apply a soldering iron at about 700 F to top of screw vertically and slowly push it in until insert is flush with top of post. I used a chisel tip as it fits in the screw head. Wait for part to cool then unscrew the screw. Should look like my part above. :)
I bought m3 :shock: someone need them? :lol:

MiL0
Posts: 57
Joined: Thu Jun 09, 2016 3:06 pm
Location: Brighton, UK
Has thanked: 28 times
Been thanked: 18 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by MiL0 » Wed Mar 08, 2017 12:15 pm

Hi - would anyone in the UK be willing to print this and send it to me? (Happy to pay the prices quoted by the OP)

User avatar
Funkenschuhster
Posts: 26
Joined: Mon Feb 06, 2017 6:54 am
Location: Germany
Has thanked: 8 times
Been thanked: 5 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by Funkenschuhster » Wed Mar 08, 2017 1:52 pm

EDIT: obsolete post. sorry @HoolyHoo
Last edited by Funkenschuhster on Thu Mar 09, 2017 9:55 am, edited 2 times in total.

Johnputer
Posts: 7
Joined: Wed Sep 28, 2016 11:27 pm
Has thanked: 2 times
Been thanked: 2 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by Johnputer » Wed Mar 08, 2017 11:51 pm

Thanks for sharing the STLs!!!

User avatar
Dextech
Posts: 205
Joined: Mon Dec 26, 2016 8:43 am
Has thanked: 70 times
Been thanked: 438 times

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by Dextech » Thu Mar 09, 2017 1:22 am

HoolyHoo wrote: If you need it printed PM me and I can print it for you for $15 plus $2 shipping US only for SNES style or $13 if its the screen only with $2 shipping US only. Unfortunately international shipping has proven to be a hassle for a cheap rate, cost me $13.50 to ship international :o . Don't think many want to pay for that.
Did you consider USPS Flat Rate Envelope/Box? I think you can cut international shipping in half with those....just not sure why I can't see prices on their webpage :?
Or if someone here in Europe could print this parts and confirm it's a fitting print then shipping could be in range of 2€ I think.
Don't grow up.
It's a trap.

User avatar
AJRedfern
Posts: 85
Joined: Wed Sep 07, 2016 4:29 am
Has thanked: 53 times
Been thanked: 54 times
Contact:

Re: HoolyHoo's AIO bracket for Kite's SAIO Board

Post by AJRedfern » Thu Mar 09, 2017 2:01 am

Just printed a couple of these (in UK) and they seem to have come out quite well, just need to tidy them up and test them.
IMG_6233.JPG
IMG_6233.JPG (2.03 MiB) Viewed 4095 times
AJRedfern - Author of the Game Boy Zero Splash Screen seen in Wermy's Custom Parts Guide Pt 2.
Image
http://www.sudomod.com/forum/viewtopic.php?f=8&t=1440

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest