[For Sale] PRS-Tech SNES-Zero. Complete retro gaming in a SNES Controller

Sell or trade things with other forum members!
Post Reply
Bahobthewarrior
Posts: 5
Joined: Thu Apr 20, 2017 1:44 pm

Re: [For Sale] PRS-Tech SNES-Zero. Complete retro gaming in a SNES Controller

Post by Bahobthewarrior » Fri May 12, 2017 10:00 am

Q: Is there room and would it be possible to add a USB slot for a second USB controller?

prerunnerseth
Posts: 279
Joined: Fri May 06, 2016 5:36 pm
Has thanked: 16 times
Been thanked: 229 times

Re: [For Sale] PRS-Tech SNES-Zero. Complete retro gaming in a SNES Controller

Post by prerunnerseth » Fri May 12, 2017 11:41 am

Bahobthewarrior wrote:
Fri May 12, 2017 10:00 am
Q: Is there room and would it be possible to add a USB slot for a second USB controller?
There is already an optional spot for a micro usb port. would just need to us an adapter.

Thanks

PRS

jimhook
Posts: 2
Joined: Fri May 12, 2017 2:33 pm

Re: [For Sale] PRS-Tech SNES-Zero. Complete retro gaming in a SNES Controller

Post by jimhook » Fri May 12, 2017 8:17 pm

I'm not liking how the tomee controller is working out. Kinda flimsy and L&R not cooperating with snes zero board :cry: plugged it in with SD from kites super aio I until I could find my other cards and got a blank black screen. Gonna have to work on it more. Anyone else run into this?

prerunnerseth
Posts: 279
Joined: Fri May 06, 2016 5:36 pm
Has thanked: 16 times
Been thanked: 229 times

Re: [For Sale] PRS-Tech SNES-Zero. Complete retro gaming in a SNES Controller

Post by prerunnerseth » Fri May 12, 2017 9:01 pm

jimhook wrote:
Fri May 12, 2017 8:17 pm
I'm not liking how the tomee controller is working out. Kinda flimsy and L&R not cooperating with snes zero board :cry: plugged it in with SD from kites super aio I until I could find my other cards and got a blank black screen. Gonna have to work on it more. Anyone else run into this?
You will need to start with a fresh retropie load.

deeleyer
Posts: 12
Joined: Tue Dec 20, 2016 10:42 am
Has thanked: 5 times
Been thanked: 1 time

Re: [For Sale] PRS-Tech SNES-Zero. Complete retro gaming in a SNES Controller

Post by deeleyer » Sat May 13, 2017 2:13 am

Board received!
Thank you very much!

Soybean18
Posts: 1
Joined: Mon May 15, 2017 3:27 pm

Re: [For Sale] PRS-Tech SNES-Zero. Complete retro gaming in a SNES Controller

Post by Soybean18 » Wed May 17, 2017 7:46 pm

Was wondering how long it usually takes to ship? I had ordered one in April and still not received

Bahobthewarrior
Posts: 5
Joined: Thu Apr 20, 2017 1:44 pm

Re: [For Sale] PRS-Tech SNES-Zero. Complete retro gaming in a SNES Controller

Post by Bahobthewarrior » Thu May 18, 2017 10:52 am

I made another purchase, to a different address. I still haven't received my first purchase.

User avatar
diko_d
Posts: 33
Joined: Mon May 08, 2017 5:18 pm
Has thanked: 27 times
Been thanked: 18 times

Re: [For Sale] PRS-Tech SNES-Zero. Complete retro gaming in a SNES Controller

Post by diko_d » Thu May 18, 2017 3:40 pm

Got mine on Tue.
I actually bought a cheap nameless SNES compatible controller. The inside of it is obviously different from the build images but it was very easy to accommodate all of it inside. Had to desolder and resolder new wires for the L and R buttons. They were very different and short for the board, but that was not too difficult.
Also, while I was at it, I added a small tactile switch at the back of the controller (hot glued it), soldered to pins 5 and 6 on the pi, and using 8bitjunkie's install (http://pie.8bitjunkie.net/retropie-shut ... e-easy-way) to add a soft shutdown and on switch. Could be a nice addition to the next version of the board to have easy soldering pads on the board for these two pins.
IMG_6145.JPG
IMG_6145.JPG (2.04 MiB) Viewed 9011 times
Last edited by diko_d on Thu May 18, 2017 3:48 pm, edited 1 time in total.

User avatar
epicpwn
Posts: 47
Joined: Tue Sep 20, 2016 12:38 pm
Has thanked: 33 times
Been thanked: 9 times

Re: [For Sale] PRS-Tech SNES-Zero. Complete retro gaming in a SNES Controller

Post by epicpwn » Thu May 18, 2017 3:47 pm

diko_d wrote:
Thu May 18, 2017 3:40 pm
Got mine on Tue.
I actually bought a cheap nameless SNES compatible controller. The inside of it is obviously different from the build images but it was very easy to accommodate all of it inside. Had to desolder and resolder new wires for the L and R buttons. They were very different and short for the board, but that was not too difficult.
Also, while I was at it, I added a small tactile switch at the back of the controller (hot glued it), soldered to pins 5 and 6 on the pi, and using 8bitjunkie's install to add a soft shutdown and on switch. Could be a nice addition to the next version of the board to have easy soldering pads on the board for these two pins.
I wanted to upload a pic of it, but for some reason could not find how to do so...
Info for "8bitjunkie's install to add a soft shutdown and on switch."? Sounds like a cool mod.

User avatar
diko_d
Posts: 33
Joined: Mon May 08, 2017 5:18 pm
Has thanked: 27 times
Been thanked: 18 times

Re: [For Sale] PRS-Tech SNES-Zero. Complete retro gaming in a SNES Controller

Post by diko_d » Thu May 18, 2017 3:52 pm

Info for "8bitjunkie's install to add a soft shutdown and on switch."? Sounds like a cool mod.
I edited my post to include the pic and a link to 8bitjunkie's page on it.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest