[For Sale, Preorder] DMG pre-cut cases

Sell or trade things with other forum members!
timemaster
Posts: 40
Joined: Fri May 05, 2017 1:00 am
Location: UK
Has thanked: 4 times
Been thanked: 14 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by timemaster » Thu Aug 09, 2018 2:04 am

incredible.. ! I have to visit you to see how you do it, its totally impossible for me :)

User avatar
Moonsword
Posts: 34
Joined: Fri Jul 07, 2017 11:20 pm
Has thanked: 14 times
Been thanked: 7 times
Contact:

Re: [For Sale, Preorder] DMG pre-cut cases

Post by Moonsword » Thu Aug 09, 2018 6:28 am

How do you get such clean cuts on the clear shell?
I am working on a transparent green one and am having issues of colour change from the plastic stretching and warping.

User avatar
KonnorJ
Posts: 385
Joined: Thu Jan 11, 2018 1:23 am
Location: United Kingdom
Has thanked: 58 times
Been thanked: 109 times
Contact:

Re: [For Sale, Preorder] DMG pre-cut cases

Post by KonnorJ » Thu Aug 09, 2018 6:34 am

Kubino uses CNC which is controlled by a machine so cuts are perfect and precise. Try a slower speed on your cutting tool if things are warping sounds like too much friction and heat is being generated.

kubino
Posts: 207
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 54 times
Been thanked: 152 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by kubino » Thu Aug 09, 2018 6:49 am

Moonsword wrote:
Thu Aug 09, 2018 6:28 am
How do you get such clean cuts on the clear shell?
I am working on a transparent green one and am having issues of colour change from the plastic stretching and warping.
in fact it looks super clean only when wet, otherwise its little matt (but still looking very nice). But I believe it can be polished to original look. I'm using feed 800mm/min and around 12000 RPM, should be even nicer with higher RPM or higher feed rate. Still need to experiment here ;-)

FireFoxGR
Posts: 25
Joined: Wed Apr 26, 2017 6:11 am
Has thanked: 32 times
Been thanked: 8 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by FireFoxGR » Tue Aug 21, 2018 2:41 am

I would like to thank Kubino once again for the help and his amazing work :)

01.jpg
01.jpg (264.76 KiB) Viewed 6805 times
02.jpg
02.jpg (241.41 KiB) Viewed 6805 times
03.jpg
03.jpg (302.07 KiB) Viewed 6805 times
This is the first batch of Dextech's battery (6000mAh) which fits perfectly after the cleanup. The 5200 one's will fit and even have a small gap..

User avatar
Brag0n
Posts: 57
Joined: Sun Sep 04, 2016 6:20 am
Location: Scandinavia
Has thanked: 87 times
Been thanked: 6 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by Brag0n » Tue Aug 28, 2018 8:24 am

FireFoxGR wrote:
Tue Aug 21, 2018 2:41 am
I would like to thank Kubino once again for the help and his amazing work :)

03.jpg

This is the first batch of Dextech's battery (6000mAh) which fits perfectly after the cleanup. The 5200 one's will fit and even have a small gap..
HOW was this made so smooth and clean!?
* CORRECTION *
Sorry! I had to read a bit of the thread first.. I've been busy for ages, so it's been a while since i was active last.

Kubino: Have you tried it on a white or (classic) grey case yet.. if so, what does that look like?
Or does it just look the best on the clear case?

User avatar
dryja123
Posts: 1076
Joined: Tue May 09, 2017 5:34 pm
Location: Central NJ
Has thanked: 239 times
Been thanked: 553 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by dryja123 » Tue Aug 28, 2018 9:45 am

Brag0n wrote:
Tue Aug 28, 2018 8:24 am

Kubino: Have you tried it on a white or (classic) grey case yet.. if so, what does that look like?
Or does it just look the best on the clear case?
Here's a classic gray that Kubino cut for me. I'm using a 6000mAh battery from Dex and it fits perfectly.
20180803_180256.jpg
20180803_180256.jpg (2.96 MiB) Viewed 6750 times

kubino
Posts: 207
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 54 times
Been thanked: 152 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by kubino » Tue Aug 28, 2018 10:38 am

Brag0n wrote:
Tue Aug 28, 2018 8:24 am
FireFoxGR wrote:
Tue Aug 21, 2018 2:41 am
I would like to thank Kubino once again for the help and his amazing work :)

03.jpg

This is the first batch of Dextech's battery (6000mAh) which fits perfectly after the cleanup. The 5200 one's will fit and even have a small gap..
HOW was this made so smooth and clean!?
* CORRECTION *
Sorry! I had to read a bit of the thread first.. I've been busy for ages, so it's been a while since i was active last.

Kubino: Have you tried it on a white or (classic) grey case yet.. if so, what does that look like?
Or does it just look the best on the clear case?
Looks pretty nice on all type of shells I have tried yet. Furthemore it can be sanded with 1000-2000grain paper to get almost perfect results.

User avatar
Brag0n
Posts: 57
Joined: Sun Sep 04, 2016 6:20 am
Location: Scandinavia
Has thanked: 87 times
Been thanked: 6 times

Re: [For Sale, Preorder] DMG pre-cut cases

Post by Brag0n » Tue Aug 28, 2018 11:22 am

Kubino: i know i promised to order two shells back in the day.. still haven't forgotten!
Just too many things that's been happening lately, and now/soon I'm switching countries.
Just need things to land/settle a bit before I make the order ;)

Still.. Your work is as sharp and impressive as the first day i laid eyes on it 😊

(Considering the situation though, i think i might end up ordering 3 shells.. When the time comes)

Jdrkangl2
Posts: 18
Joined: Wed Sep 05, 2018 11:46 am
Has thanked: 1 time

Re: [For Sale, Preorder] DMG pre-cut cases

Post by Jdrkangl2 » Wed Sep 05, 2018 1:25 pm

Is anyone still doing this? The case is the only thing holding me back from making a gbz. I have tremors in my hands so I can’t really do it myself.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest