Page 2 of 14
Re: [Gauging Interest] L and R button Bracket
Posted: Thu Jul 06, 2017 11:46 am
by erik_gee
It looks like as of now, there is some small interest. So at the very least , I'll have a short run production for those interested . I'm gonna wait a little longer to get more comments from the rest of the community. I'll also check at my post office to see how much to ship is and get a more finite sale price going. Thank you all for your input so far! Please if you have any other input go right ahead and comment !
Re: [Gauging Interest] L and R button Bracket
Posted: Thu Jul 06, 2017 1:19 pm
by canzilla
Planning for my first GBZ build using Kite's Super AIO.
This would be perfect for me as I don't have any experience. It would help a lot.
I am interested in 1 or 2 sets.
Looking forward for the update
Re: [Gauging Interest] L and R button Bracket
Posted: Thu Jul 06, 2017 2:00 pm
by erik_gee
canzilla wrote: ↑Thu Jul 06, 2017 1:19 pm
Planning for my first GBZ build using Kite's Super AIO.
This would be perfect for me as I don't have any experience. It would help a lot.
I am interested in 1 or 2 sets.
Looking forward for the update
Sounds good! I've never ordered kite board so I am unaware if there will be any issues with the two. Does anyone with the board know if it dips in to this area ? The bracket sits below the clearance level of the battery compartment
Re: [Gauging Interest] L and R button Bracket
Posted: Thu Jul 06, 2017 2:39 pm
by Elmafioso90
canzilla wrote: ↑Thu Jul 06, 2017 1:19 pm
Sounds good! I've never ordered kite board so I am unaware if there will be any issues with the two. Does anyone with the board know if it dips in to this area ? The bracket sits below the clearance level of the battery compartment
The only problem with Kite's SAIO is that you will have to decide between having these shoulder buttons or to keep the NDSL GBA cartridge.
Unless you want to use the PRS Tech custom cartridge reader, you can always glue the cartridge to keep the aesthetics and have fully functional buttons.
Re: [Gauging Interest] L and R button Bracket
Posted: Thu Jul 06, 2017 3:10 pm
by erik_gee
Elmafioso90 wrote: ↑Thu Jul 06, 2017 2:39 pm
canzilla wrote: ↑Thu Jul 06, 2017 1:19 pm
Sounds good! I've never ordered kite board so I am unaware if there will be any issues with the two. Does anyone with the board know if it dips in to this area ? The bracket sits below the clearance level of the battery compartment
The only problem with Kite's SAIO is that you will have to decide between having these shoulder buttons or to keep the NDSL GBA cartridge.
Unless you want to use the PRS Tech custom cartridge reader, you can always glue the cartridge to keep the aesthetics and have fully functional buttons.
Right. I think that was mentioned earlier about the cartridge reader. As long as the board itself isn't affected then that is good. Personally I don't touch my SD card after Initial setup as I have no need for it. But I use the shoulder buttons all the time, so I'd rather have comfortable buttons over removable SD card, but everyone is different location. Thank you for your input!
Re: [Gauging Interest] L and R button Bracket
Posted: Thu Jul 06, 2017 6:38 pm
by skimzor
I'm in for just the bracket or the set if you decide to make that available. Thanks!
Re: [Gauging Interest] L and R button Bracket
Posted: Thu Jul 06, 2017 7:54 pm
by Dukana
erik_gee wrote: ↑Thu Jul 06, 2017 3:10 pm
Right. I think that was mentioned earlier about the cartridge reader. As long as the board itself isn't affected then that is good. Personally I don't touch my SD card after Initial setup as I have no need for it. But I use the shoulder buttons all the time, so I'd rather have comfortable buttons over removable SD card, but everyone is different location. Thank you for your input!
I'm with you. While there is a cool novelty factor in having the micro SD in a game cart, it's not very useful or practical, and it's a major pain to get perfect! Most builds will utilize the Zero W, so you can adjust files via wifi.
If you're using one of Kites SAIO kits, the micro SD is already moved to the side, making it easily accessible.
Re: [Gauging Interest] L and R button Bracket
Posted: Fri Jul 07, 2017 12:11 am
by MasterfulMonkey
I really like this, as a lot of other button methods seem forced or unaesthetic.
Re: [Gauging Interest] L and R button Bracket
Posted: Fri Jul 07, 2017 1:28 am
by erik_gee
MasterfulMonkey wrote: ↑Fri Jul 07, 2017 12:11 am
I really like this, as a lot of other button methods seem forced or unaesthetic.
Thank you! Put a bit of time into it to make it functional and easy on the eyes haha you should see the prototypes, basically just blocks at that point
Re: [Gauging Interest] L and R button Bracket
Posted: Fri Jul 07, 2017 2:10 am
by neolith
canzilla wrote: ↑Thu Jul 06, 2017 1:19 pm
Planning for my first GBZ build using Kite's Super AIO.
This would be perfect for me as I don't have any experience. It would help a lot.
I'm in the same boat and very interested in buying this (prefereably as a kit).