[For Sale] 4 Button and 2 Button Soft Silicone Back Button PCB
Posted: Thu Feb 01, 2018 4:51 pm
I have about 15 of each of these back button boards that use the nice, soft silicone buttons. You get that silicone membrane feel without the hassle of using button wells or membranes. The boards mount to the back shell of the GB case and use the existing case screw mounts. Note, that you won't be able to use a cartridge holder with these but you can still use a dummy cartridge. This should work with Kites board but I haven't tested 100% yet and will confirmation soon on this.
There are two versions, one for two button (L1 and R1) and one for four button (L1, R1, L2 and R2) setups. What I have available to ship as a kit in the 4 button version is the 4 button PCB, 4 soft silicone switches, 4 3d printed inserts for caps, 2 lower posts 3d printed washers, and drill guide. The inserts are placed inside the caps which require an easy modification. The inserts take away any slop in the buttons so there is no rattle with the buttons. The washers are provided so trimming the lower cartridge posts are not necessary. I do not have the caps or screws available unfortunately but are readily available from various suppliers (Ebay, AliExpress, Banggood, Amazon) very cheaply. Sorry about that. The silicone buttons come unsoldered but are very easy to place. If you need me to do it, just PM me.
Here are some images of the two setups.
This is what I can ship now with the four button setup. Like I said earlier, I have a limited supply so first come first serve. Here is what I would ship.
The two button is similar with only the needed parts for that setup.
The 4 button board would be $15 plus $3.50 shipping US with tracking or $5.00 International with no tracking.
The 2 button board would be $12 plus $3.50 shipping US with tracking or $5.00 International with no tracking.
Since I have a limited supply, please PM your PayPal email and I will invoice you that way I don't oversell what I don't have. Please include whether you live in the US or are international so I can invoice the proper shipping amount.
As always thanks and Happy Modding!
There are two versions, one for two button (L1 and R1) and one for four button (L1, R1, L2 and R2) setups. What I have available to ship as a kit in the 4 button version is the 4 button PCB, 4 soft silicone switches, 4 3d printed inserts for caps, 2 lower posts 3d printed washers, and drill guide. The inserts are placed inside the caps which require an easy modification. The inserts take away any slop in the buttons so there is no rattle with the buttons. The washers are provided so trimming the lower cartridge posts are not necessary. I do not have the caps or screws available unfortunately but are readily available from various suppliers (Ebay, AliExpress, Banggood, Amazon) very cheaply. Sorry about that. The silicone buttons come unsoldered but are very easy to place. If you need me to do it, just PM me.
Here are some images of the two setups.
- 1.jpg (46.72 KiB) Viewed 10937 times
- 2 .jpg (77.64 KiB) Viewed 10937 times
- 3.jpg (66.76 KiB) Viewed 10937 times
- 4.JPG (139.5 KiB) Viewed 10937 times
- 5.JPG (78.24 KiB) Viewed 10937 times
- 7.JPG (78.5 KiB) Viewed 10937 times
This is what I can ship now with the four button setup. Like I said earlier, I have a limited supply so first come first serve. Here is what I would ship.
- 8.jpg (529.05 KiB) Viewed 10937 times
The 4 button board would be $15 plus $3.50 shipping US with tracking or $5.00 International with no tracking.
The 2 button board would be $12 plus $3.50 shipping US with tracking or $5.00 International with no tracking.
Since I have a limited supply, please PM your PayPal email and I will invoice you that way I don't oversell what I don't have. Please include whether you live in the US or are international so I can invoice the proper shipping amount.
As always thanks and Happy Modding!
