[FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Sell or trade things with other forum members!
User avatar
HoolyHoo
Posts: 766
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 206 times
Been thanked: 741 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by HoolyHoo » Fri Jun 22, 2018 12:26 pm

Ark wrote:
Fri Jun 22, 2018 12:12 pm
Hi Hoolyhoo

Do you have the A101 buttons in grey? from the picture is hard to see clearly.
Yes. It is a light grey but it is grey. 😀

rogerfliporian
Posts: 20
Joined: Tue Jun 12, 2018 7:13 am
Been thanked: 2 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by rogerfliporian » Tue Jun 26, 2018 8:10 am

Ordered, arrived, and installed and these buttons look and feel great!
I did have a small alignment issue with one button hole like a previous poster but was able to mostly correct it. I suggest going very slowly and hand turning your bit. More important than alignment with the caps and the button membranes (there is a bit of wiggle room here) is ensuring that your holes are centered/aligned with each other so that they look as good as Hoolyhoo's OP image.

User avatar
Moonsword
Posts: 34
Joined: Fri Jul 07, 2017 11:20 pm
Has thanked: 14 times
Been thanked: 7 times
Contact:

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by Moonsword » Fri Jun 29, 2018 6:13 am

Is there a way I can order one of these and an AIO bracket and combine them together in one parcel to save a bit on postage?

User avatar
HoolyHoo
Posts: 766
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 206 times
Been thanked: 741 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by HoolyHoo » Fri Jun 29, 2018 6:18 am

Moonsword wrote:
Fri Jun 29, 2018 6:13 am
Is there a way I can order one of these and an AIO bracket and combine them together in one parcel to save a bit on postage?
If your in the US PM me and I can combine. International orders not possible because brackets and pcb coming from two different locations.

User avatar
Moonsword
Posts: 34
Joined: Fri Jul 07, 2017 11:20 pm
Has thanked: 14 times
Been thanked: 7 times
Contact:

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by Moonsword » Fri Jun 29, 2018 8:02 am

HoolyHoo wrote:
Fri Jun 29, 2018 6:18 am
Moonsword wrote:
Fri Jun 29, 2018 6:13 am
Is there a way I can order one of these and an AIO bracket and combine them together in one parcel to save a bit on postage?
If your in the US PM me and I can combine. International orders not possible because brackets and pcb coming from two different locations.
Unfortunately, I am in Aus.

User avatar
Moonsword
Posts: 34
Joined: Fri Jul 07, 2017 11:20 pm
Has thanked: 14 times
Been thanked: 7 times
Contact:

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by Moonsword » Fri Jul 06, 2018 4:21 am

Hi Hooly,

I have a question that is slightly off topic. With the fan mount that you designed, have you tried it with Kite's CS and if so, where does it sit above the Pi?
I am asking as I am looking at grabbing a game that doesn't work and doing something similar with the cartridge.

User avatar
HoolyHoo
Posts: 766
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 206 times
Been thanked: 741 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by HoolyHoo » Fri Jul 06, 2018 6:36 pm

Moonsword wrote:
Fri Jul 06, 2018 4:21 am
Hi Hooly,

I have a question that is slightly off topic. With the fan mount that you designed, have you tried it with Kite's CS and if so, where does it sit above the Pi?
I am asking as I am looking at grabbing a game that doesn't work and doing something similar with the cartridge.
Yes I have tried it as it was designed for it. It is almost right on top of the pi. I’m sure with a little modification you can do something similar with an actual cartridge. :)

Siniko
Posts: 5
Joined: Sun Jun 10, 2018 2:15 pm
Has thanked: 4 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by Siniko » Tue Jul 24, 2018 12:42 pm

The inserts for these were not pictured, but do they look similar to these?
SpoilerShow
BB2.jpg
BB2.jpg (228.19 KiB) Viewed 12287 times
The image was taken from the "Universal Button L1, L2, R1, R2 Back Button PCB" sale thread. I'm guessing they would somewhat be the same albeit a little smaller maybe?

User avatar
Kayumba
Posts: 73
Joined: Mon Sep 25, 2017 12:36 am
Location: France
Has thanked: 8 times
Been thanked: 17 times
Contact:

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by Kayumba » Sun Jul 29, 2018 11:24 am

What about guide for drill holes in right place?

User avatar
HoolyHoo
Posts: 766
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 206 times
Been thanked: 741 times

Re: [FOR-SALE] Slim 4 Soft Back Button PCB, Caps and 3D Parts (OPEN)

Post by HoolyHoo » Sun Jul 29, 2018 11:38 am

Kayumba wrote:
Sun Jul 29, 2018 11:24 am
What about guide for drill holes in right place?
The pcb has holes that are centered where buttons go so built in drill guide. Just mark before soldering the buttons to the pcb.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest