[SALE] Retro PSU, a 3.5A Output capable Boost Board

[lightpixel]

Thank You.
But for now I´am going for GPIO Controller to get the fully functions of your of the retro PSU boards.

[lightpixel]

Everthing´s working so far. The only issue: L+R and Shutdown not working. I´ve checked connections serveral times by multimeter. Everthings fine. I´ve checked keys.cfg twice. No errors. wired!!

[Helder]

Yes there was an error in the compiled software. Bluup should've updated the software by now with these fixes, check my Github again.

The shutdown I think needs another script but I'll check it out and let you know.

Edit: Actually give me till the weekend to update my GitHub with the updates.

[lightpixel]

Thanks for the reply. I´ll check for an update next week...

[Kenshin16]

I'm just curious what kind of LEDs can be used for the charge/charged pads? Can you link me to some?

[lightpixel]

The LED Output Voltage are ~ 1,8 V ...so have a look for LED´s with this working voltage...

[Helder]

Most 3mm or 5mm LED should work, the resistors are already there so just add the LED.

[lightpixel]

Hello Helder,

It seems you´ve update the allinone script... but for now, nothing is working. No battery monitor, no controller...
a look into rc.local shows some wired settings:

# Print the IP address
_IP=$(hostname -I) || true
if [ "$_IP" ]; then
printf "My IP address is %s\n" "$_IP"
fi

/home/pi/OneForAll/monitor < /dev/zero &> /dev/null &

can you have please look into? My build is ready, but the software part isn´t working anymore as you promised in your description for you retro psu!

best regards
chris

[Helder]

It should be working with the exception of the analog stick which needs another fix. In order to use it you must comment out or delete the old rc.local entry and the AllForOne folder then you can follow the instructions to reinstall it. Give it a shot and let me know (this was used by other people this weekend so I know it's working minus the analog stick).

[lightpixel]

Hello Helder,
I dit a fresh retropie 4.4 install and then I installed the script. No success. The wiring is the same that works with the old script...

Update: Now it works in Emulatorstation, but no ingame controlls... by configuration "Input" buttons will be found as "keyboard" now...is it correct?