Worst case scenario for your volume knob, ebay has a bunch of wheel potentiometers from china for very cheap.
http://www.ebay.com/sch/i.html?_from=R4 ... r&_sacat=0
on their own they're too thin but if you break the plastic wheel off one of the potentiometers and glue it onto the top of a second one it's almost identical in thickness to the DMG pot. This may be what I did to replace the DMG one I accidentally lost on my way home last week *looks around guiltily*
[WANTED]: non-oem power switch and pot wheel
Re: [WANTED]: non-oem power switch and pot wheel
That sounds like it might work, use some super glue or some of that plastic bonding gel stuff.woodat wrote:Worst case scenario for your volume knob, ebay has a bunch of wheel potentiometers from china for very cheap.
http://www.ebay.com/sch/i.html?_from=R4 ... r&_sacat=0
on their own they're too thin but if you break the plastic wheel off one of the potentiometers and glue it onto the top of a second one it's almost identical in thickness to the DMG pot. This may be what I did to replace the DMG one I accidentally lost on my way home last week *looks around guiltily*
Re: [WANTED]: non-oem power switch and pot wheel
FYI: I'm going to order a model B103 16x2mm 10K Ohm Double Dial Taper Volume Wheel Potentiometer.
The volume wheel might be a little bit thinner but has the same resistance and 5 connections as the original so should work with the All in one board of helder.
5 pieces cost around $3.30 on aliexpress, ebay... .
http://www.google.com/?q=B103+16x2mm+10 ... eel+Duplex
For more info on the GB original volume wheel:
http://chipmusic.org/forums/topic/12200 ... is-repair/
The volume wheel might be a little bit thinner but has the same resistance and 5 connections as the original so should work with the All in one board of helder.
5 pieces cost around $3.30 on aliexpress, ebay... .
http://www.google.com/?q=B103+16x2mm+10 ... eel+Duplex
For more info on the GB original volume wheel:
http://chipmusic.org/forums/topic/12200 ... is-repair/
Who is online
Users browsing this forum: No registered users and 1 guest