[WANTED] 3D Printed Screen, Button, & Component Bracket
Re: [WANTED] 3D Printed Screen, Button, & Component Bracket
Alright, here is a quick version. I have not printed it for fit. Who wants to give it a go with a print and test?
- YaYa
- Posts: 1719
- Joined: Mon Jun 26, 2017 12:42 pm
- Location: brittany - France
- Has thanked: 871 times
- Been thanked: 689 times
- Contact:
Re: [WANTED] 3D Printed Screen, Button, & Component Bracket
Looks great - I am interested in this. Is this meant to work with most any of those 3.5" backup camera screens, or is there a particular screen in mind? I have a couple of the BW screens (I think variant 7 from the wiki).
- rodocop
- Posts: 1723
- Joined: Mon Aug 22, 2016 3:14 pm
- Location: Saskatchewan
- Has thanked: 606 times
- Been thanked: 608 times
Re: [WANTED] 3D Printed Screen, Button, & Component Bracket
should work with most screens, only thing is that you need to install the screen upsidedown, so the ribbon connectors comes out the top. A simple line added to the config.txt will flip the image around. display_rotate=2
_____________________________________________________
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
Re: [WANTED] 3D Printed Screen, Button, & Component Bracket
Yes, any of those 3.5 backup cameras screens will work. I did get around to printing it and it seems like its a go. Everything lines up nicely with the existing case holes including the Pi and SD slot. This is the style USB port to use. It's flatter and allows the case to close properly without needing to trim cartridge slot.
USBShow
STL FileShow
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: [WANTED] 3D Printed Screen, Button, & Component Bracket
Great work, HoolyHoo - Very kind. I'll be looking to use this in the next build. Thanks
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: [WANTED] 3D Printed Screen, Button, & Component Bracket
Printed one of these last night, it looks the business. Will incorporate into my next build and upload some photos
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
- erik_gee
- Posts: 356
- Joined: Thu Jun 16, 2016 12:57 am
- Location: United States
- Has thanked: 137 times
- Been thanked: 193 times
Re: [WANTED] 3D Printed Screen, Button, & Component Bracket
Very nice, thanks again for the work hoolyhoo! I actually worked on something similar a while back when I had some time. Never got around to finishing it. Puts the HDMI in the port instead.
GBC AIO kit Sales Thread:https://www.sudomod.com/forum/viewtopic.php?f=38&t=9928
Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192
AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431
6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811
Bunch of different shoulder button kits Sales Thread:viewtopic.php?f=38&t=6233&p=63192#p63192
AIO board for DMG Sales Thread:
viewtopic.php?f=38&t=6431
6 Button Common Ground Board Sales Thread: viewtopic.php?f=38&t=4811
- ViaCard
- Posts: 68
- Joined: Sun Aug 06, 2017 11:30 am
- Location: Zurich, Switzerland
- Has thanked: 53 times
- Been thanked: 26 times
Re: [WANTED] 3D Printed Screen, Button, & Component Bracket
The bracket looks and is great!! Thank you HoolyHoo!!!
::::: My Game Boy Zero's :::::
http://www.sudomod.com/forum/viewtopic.php?f=43&t=4656
::::: My MintyPi :::::
http://www.sudomod.com/forum/viewtopic.php?f=32&t=4653
http://www.sudomod.com/forum/viewtopic.php?f=43&t=4656
::::: My MintyPi :::::
http://www.sudomod.com/forum/viewtopic.php?f=32&t=4653
Who is online
Users browsing this forum: No registered users and 1 guest