Gaboze Pocaio

If you'd like to gauge interest in an idea before putting it into production, do it here!
spacemishka
Posts: 72
Joined: Tue May 29, 2018 6:47 am
Has thanked: 14 times
Been thanked: 13 times

Re: Gaboze Pocaio

Post by spacemishka » Mon Oct 15, 2018 3:22 am

lukesky333 wrote:
Thu Oct 11, 2018 8:14 am
Is it possible to use a Banana Pi Zero instead of a Raspberry Pi Zero? It should have the same size but a lot more power?

I've one more question:
I try to order all needed parts for the PCB. Is it needed, that the resistors have a tolerance of 0.1%? I'm from Europe and an order from Digikey is very expensive. Is it possible to get all these parts from Aliexpress too?
Not only it requires more power, banana pi need also active cooling

lukesky333
Posts: 5
Joined: Thu Oct 11, 2018 8:09 am

Re: Gaboze Pocaio

Post by lukesky333 » Wed Nov 07, 2018 7:29 am

Thanks for the info...

I've another question:
Has anybody a actual shopping list for aliexpress? Digiverse orders Austria are to expensive so I want to order the parts from aliexpress. I've found a lot, but I need suggestions for the Micro-USB-connector and the battery.

User avatar
YaYa
Posts: 1719
Joined: Mon Jun 26, 2017 12:42 pm
Location: brittany - France
Has thanked: 871 times
Been thanked: 688 times
Contact:

Re: Gaboze Pocaio

Post by YaYa » Sat Nov 10, 2018 9:39 am

Hello sudoers !

Just to let you know that i did a small batch of stickers for the GABOZE to have something custom into your hands.
The link to the product page https://yaya-design.com/index.php/categ ... een-detail
Cartridge-GABOZE-POCAIO-platform-picture.jpg
Cartridge-GABOZE-POCAIO-platform-picture.jpg (4.25 MiB) Viewed 3083 times
GBP-GABOZE-POCAIO-platform-picture.jpg
GBP-GABOZE-POCAIO-platform-picture.jpg (4.54 MiB) Viewed 3083 times
Follow me on instagram Image

lukesky333
Posts: 5
Joined: Thu Oct 11, 2018 8:09 am

Re: Gaboze Pocaio

Post by lukesky333 » Wed Dec 05, 2018 8:55 am

Hi,

the WIKI is offline - why? I've ordered all parts and need now further instructions from the wiki.

Please help me!!!

lukesky333
Posts: 5
Joined: Thu Oct 11, 2018 8:09 am

Re: Gaboze Pocaio

Post by lukesky333 » Thu Dec 06, 2018 6:04 am

lukesky333 wrote:
Wed Dec 05, 2018 8:55 am
Hi,

the WIKI is offline - why? I've ordered all parts and need now further instructions from the wiki.

Please help me!!!
Ok, I've found it... The project was renamed, so no link was working anymore.

Wiki

CornholioGSM
Posts: 1
Joined: Tue Dec 11, 2018 6:34 pm

Re: Gaboze Pocaio

Post by CornholioGSM » Tue Dec 11, 2018 6:50 pm

hello, i am new here....and new on pi zero :)
i have one question - can i use another TFT display?
I want to fit inside pocket 2.8" 640X480 TFT display with 60+ fps marked as MZDPI_VGA_ZERO.
This display have better resolution and maybe better colors.
is possible to use it with some wiring?

User avatar
VeteranGamer
Posts: 1644
Joined: Thu Jan 26, 2017 11:12 am
Location: London, UK
Has thanked: 471 times
Been thanked: 862 times

Re: Gaboze Pocaio

Post by VeteranGamer » Fri Dec 14, 2018 4:23 am

CornholioGSM wrote:
Tue Dec 11, 2018 6:50 pm
hello, i am new here....and new on pi zero :)
i have one question - can i use another TFT display?
I want to fit inside pocket 2.8" 640X480 TFT display with 60+ fps marked as MZDPI_VGA_ZERO.
This display have better resolution and maybe better colors.
is possible to use it with some wiring?
short anwser.....

NO


that screen uses DPI, and this build/project uses SPI
(completely different wiring/setup)


.

lukesky333
Posts: 5
Joined: Thu Oct 11, 2018 8:09 am

Re: Gaboze Pocaio

Post by lukesky333 » Wed Jan 16, 2019 6:38 am

I can't find the image for the GABOZE Pocaio anymore... Please give me the link to the image for installation....

Thanks!

User avatar
rodocop
Posts: 1591
Joined: Mon Aug 22, 2016 3:14 pm
Location: Saskatchewan
Has thanked: 575 times
Been thanked: 566 times

Re: Gaboze Pocaio

Post by rodocop » Thu Jan 17, 2019 8:58 am

lukesky333 wrote:
Wed Jan 16, 2019 6:38 am
I can't find the image for the GABOZE Pocaio anymore... Please give me the link to the image for installation....

Thanks!
hmm, can't seem to find one for the original Gaboze, might have to make your own, see the links. Use a base 4.4 image.

Screen set up:
https://github.com/32teeth/GabozePocaio ... FT-Display
PWM audio setup:
https://github.com/32teeth/GabozePocaio ... M-Settings
Button setup:
Install retrogame using adafruits guide, and then see the proper values to add to the retroarch.cfg
https://github.com/32teeth/GabozePocaio ... 8Manual%29

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest