[Gauging Interest] HoolyHoo PSP1000 Joystick Bracket

If you'd like to gauge interest in an idea before putting it into production, do it here!
Mörksn
Posts: 3
Joined: Tue Oct 24, 2017 12:34 pm
Has thanked: 2 times

Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket

Post by Mörksn » Tue Nov 14, 2017 3:15 pm

And just in 1 Piece. I'll get one of them when you offer this.

User avatar
dryja123
Posts: 1008
Joined: Tue May 09, 2017 5:34 pm
Location: Central NJ
Has thanked: 226 times
Been thanked: 527 times

Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket

Post by dryja123 » Tue Nov 14, 2017 4:08 pm

HoolyHoo wrote:
Tue Nov 14, 2017 2:55 pm
dryja123 wrote:
Fri Nov 10, 2017 9:31 am
It's actually more comfortable then you would think, YaYa. I thought so too but I did a physical mockup and it was really comfortable. I was able to install a second joystick below the start and select and the headphone jack but gave up on it.

Edit: I would leave the screw post in place. I was thinking the bracket would loop around the screw post for alignment and support.
Played around with your suggestion. Here is the result.

Duel.jpg

Not as bad as I thought with the placement. This will work with Kite's new Circuit Sword but is not backward compatible with his old one. Reason for this, on his old board there is a chip on the underside where the second joystick would go. On his new board he has moved all the components to the top so its good to go. :D
That is so beautiful, I could kiss you! (I won't though because that's just weird.)

Lololo
Posts: 25
Joined: Sat Apr 01, 2017 11:46 am
Has thanked: 24 times
Been thanked: 7 times

Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket

Post by Lololo » Wed Nov 15, 2017 6:49 am

HoolyHoo wrote:
Tue Nov 14, 2017 2:55 pm
dryja123 wrote:
Fri Nov 10, 2017 9:31 am
It's actually more comfortable then you would think, YaYa. I thought so too but I did a physical mockup and it was really comfortable. I was able to install a second joystick below the start and select and the headphone jack but gave up on it.

Edit: I would leave the screw post in place. I was thinking the bracket would loop around the screw post for alignment and support.
Played around with your suggestion. Here is the result.

Duel.jpg

Not as bad as I thought with the placement. This will work with Kite's new Circuit Sword but is not backward compatible with his old one. Reason for this, on his old board there is a chip on the underside where the second joystick would go. On his new board he has moved all the components to the top so its good to go. :D
Great job

are you going to sell this version soon?

User avatar
HoolyHoo
Posts: 709
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 198 times
Been thanked: 709 times

Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket

Post by HoolyHoo » Wed Nov 15, 2017 7:00 am

Lololo wrote:
Wed Nov 15, 2017 6:49 am
HoolyHoo wrote:
Tue Nov 14, 2017 2:55 pm
dryja123 wrote:
Fri Nov 10, 2017 9:31 am
It's actually more comfortable then you would think, YaYa. I thought so too but I did a physical mockup and it was really comfortable. I was able to install a second joystick below the start and select and the headphone jack but gave up on it.

Edit: I would leave the screw post in place. I was thinking the bracket would loop around the screw post for alignment and support.
Played around with your suggestion. Here is the result.

Duel.jpg

Not as bad as I thought with the placement. This will work with Kite's new Circuit Sword but is not backward compatible with his old one. Reason for this, on his old board there is a chip on the underside where the second joystick would go. On his new board he has moved all the components to the top so its good to go. :D
Great job

are you going to sell this version soon?
Thanks, I probably won't add this to the sales thread but if interested, shoot me a PM and I can do a special order for those who want it. :D

User avatar
vnman
Posts: 147
Joined: Tue Jun 21, 2016 5:21 am
Has thanked: 5 times
Been thanked: 34 times

Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket

Post by vnman » Thu Nov 16, 2017 4:07 am

I will definitely buy this.

Can you print one with clear filament?

Double0EK
Posts: 70
Joined: Thu Dec 08, 2016 4:50 pm
Has thanked: 51 times
Been thanked: 8 times

Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket

Post by Double0EK » Sat Nov 18, 2017 4:27 am

Just seen this. I'm planning a 6 button and Analog Stick on the bottom corner..anyway you can implement that type of design?

User avatar
HoolyHoo
Posts: 709
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 198 times
Been thanked: 709 times

Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket

Post by HoolyHoo » Sat Nov 18, 2017 6:49 am

Double0EK wrote:
Sat Nov 18, 2017 4:27 am
Just seen this. I'm planning a 6 button and Analog Stick on the bottom corner..anyway you can implement that type of design?
You mean like this?
4219BD77-46D0-463C-A05F-0423A02349A5.jpeg
4219BD77-46D0-463C-A05F-0423A02349A5.jpeg (49.29 KiB) Viewed 3291 times
This was a special order for someone else 😉

Double0EK
Posts: 70
Joined: Thu Dec 08, 2016 4:50 pm
Has thanked: 51 times
Been thanked: 8 times

Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket

Post by Double0EK » Sat Nov 18, 2017 7:04 am

HoolyHoo wrote:
Sat Nov 18, 2017 6:49 am
You mean like this?
4219BD77-46D0-463C-A05F-0423A02349A5.jpeg
This was a special order for someone else 😉
Yes! Thats beautiful!!

Nurky1983
Posts: 3
Joined: Tue Jul 18, 2017 3:41 pm
Has thanked: 2 times
Been thanked: 1 time

Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket

Post by Nurky1983 » Wed Nov 29, 2017 11:47 am

HoolyHoo wrote:
Tue Nov 14, 2017 2:55 pm
dryja123 wrote:
Fri Nov 10, 2017 9:31 am
It's actually more comfortable then you would think, YaYa. I thought so too but I did a physical mockup and it was really comfortable. I was able to install a second joystick below the start and select and the headphone jack but gave up on it.

Edit: I would leave the screw post in place. I was thinking the bracket would loop around the screw post for alignment and support.
Played around with your suggestion. Here is the result.

Duel.jpg

Not as bad as I thought with the placement. This will work with Kite's new Circuit Sword but is not backward compatible with his old one. Reason for this, on his old board there is a chip on the underside where the second joystick would go. On his new board he has moved all the components to the top so its good to go. :D

Hy how can I order a holder?!?! and what would that cost?!?!
Would like two with the 2 analog sticks.
Thank you

User avatar
dryja123
Posts: 1008
Joined: Tue May 09, 2017 5:34 pm
Location: Central NJ
Has thanked: 226 times
Been thanked: 527 times

Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket

Post by dryja123 » Wed Nov 29, 2017 1:01 pm

Nurky1983 wrote:
Wed Nov 29, 2017 11:47 am

Hy how can I order a holder?!?! and what would that cost?!?!
Would like two with the 2 analog sticks.
Thank you
Here you go: viewtopic.php?f=27&t=2553

I'm going to move this thread to the for sale / trade section of the forum. It currently resides in 3d printing and it's kind of hard to find.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest