Page 4 of 6
Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket
Posted: Tue Nov 14, 2017 3:15 pm
by Mörksn
And just in 1 Piece. I'll get one of them when you offer this.
Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket
Posted: Tue Nov 14, 2017 4:08 pm
by dryja123
HoolyHoo wrote: ↑Tue Nov 14, 2017 2:55 pm
dryja123 wrote: ↑Fri Nov 10, 2017 9:31 am
It's actually more comfortable then you would think, YaYa. I thought so too but I did a physical mockup and it was really comfortable. I was able to install a second joystick below the start and select and the headphone jack but gave up on it.
Edit: I would leave the screw post in place. I was thinking the bracket would loop around the screw post for alignment and support.
Played around with your suggestion. Here is the result.
Duel.jpg
Not as bad as I thought with the placement. This will work with Kite's new Circuit Sword but is not backward compatible with his old one. Reason for this, on his old board there is a chip on the underside where the second joystick would go. On his new board he has moved all the components to the top so its good to go.
That is so beautiful, I could kiss you! (I won't though because that's just weird.)
Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket
Posted: Wed Nov 15, 2017 6:49 am
by Lololo
HoolyHoo wrote: ↑Tue Nov 14, 2017 2:55 pm
dryja123 wrote: ↑Fri Nov 10, 2017 9:31 am
It's actually more comfortable then you would think, YaYa. I thought so too but I did a physical mockup and it was really comfortable. I was able to install a second joystick below the start and select and the headphone jack but gave up on it.
Edit: I would leave the screw post in place. I was thinking the bracket would loop around the screw post for alignment and support.
Played around with your suggestion. Here is the result.
Duel.jpg
Not as bad as I thought with the placement. This will work with Kite's new Circuit Sword but is not backward compatible with his old one. Reason for this, on his old board there is a chip on the underside where the second joystick would go. On his new board he has moved all the components to the top so its good to go.
Great job
are you going to sell this version soon?
Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket
Posted: Wed Nov 15, 2017 7:00 am
by HoolyHoo
Lololo wrote: ↑Wed Nov 15, 2017 6:49 am
HoolyHoo wrote: ↑Tue Nov 14, 2017 2:55 pm
dryja123 wrote: ↑Fri Nov 10, 2017 9:31 am
It's actually more comfortable then you would think, YaYa. I thought so too but I did a physical mockup and it was really comfortable. I was able to install a second joystick below the start and select and the headphone jack but gave up on it.
Edit: I would leave the screw post in place. I was thinking the bracket would loop around the screw post for alignment and support.
Played around with your suggestion. Here is the result.
Duel.jpg
Not as bad as I thought with the placement. This will work with Kite's new Circuit Sword but is not backward compatible with his old one. Reason for this, on his old board there is a chip on the underside where the second joystick would go. On his new board he has moved all the components to the top so its good to go.
Great job
are you going to sell this version soon?
Thanks, I probably won't add this to the sales thread but if interested, shoot me a PM and I can do a special order for those who want it.
Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket
Posted: Thu Nov 16, 2017 4:07 am
by vnman
I will definitely buy this.
Can you print one with clear filament?
Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket
Posted: Sat Nov 18, 2017 4:27 am
by Double0EK
Just seen this. I'm planning a 6 button and Analog Stick on the bottom corner..anyway you can implement that type of design?
Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket
Posted: Sat Nov 18, 2017 6:49 am
by HoolyHoo
Double0EK wrote: ↑Sat Nov 18, 2017 4:27 am
Just seen this. I'm planning a 6 button and Analog Stick on the bottom corner..anyway you can implement that type of design?
You mean like this?
- 4219BD77-46D0-463C-A05F-0423A02349A5.jpeg (49.29 KiB) Viewed 16255 times
This was a special order for someone else
Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket
Posted: Sat Nov 18, 2017 7:04 am
by Double0EK
HoolyHoo wrote: ↑Sat Nov 18, 2017 6:49 am
You mean like this?
4219BD77-46D0-463C-A05F-0423A02349A5.jpeg
This was a special order for someone else
Yes! Thats beautiful!!
Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket
Posted: Wed Nov 29, 2017 11:47 am
by Nurky1983
HoolyHoo wrote: ↑Tue Nov 14, 2017 2:55 pm
dryja123 wrote: ↑Fri Nov 10, 2017 9:31 am
It's actually more comfortable then you would think, YaYa. I thought so too but I did a physical mockup and it was really comfortable. I was able to install a second joystick below the start and select and the headphone jack but gave up on it.
Edit: I would leave the screw post in place. I was thinking the bracket would loop around the screw post for alignment and support.
Played around with your suggestion. Here is the result.
Duel.jpg
Not as bad as I thought with the placement. This will work with Kite's new Circuit Sword but is not backward compatible with his old one. Reason for this, on his old board there is a chip on the underside where the second joystick would go. On his new board he has moved all the components to the top so its good to go.
Hy how can I order a holder?!?! and what would that cost?!?!
Would like two with the 2 analog sticks.
Thank you
Re: [Gauging Interest] HoolyHoo PSP1000 Joystick Bracket
Posted: Wed Nov 29, 2017 1:01 pm
by dryja123
Nurky1983 wrote: ↑Wed Nov 29, 2017 11:47 am
Hy how can I order a holder?!?! and what would that cost?!?!
Would like two with the 2 analog sticks.
Thank you
Here you go:
viewtopic.php?f=27&t=2553
I'm going to move this thread to the for sale / trade section of the forum. It currently resides in 3d printing and it's kind of hard to find.
