Wire diameter. What to choose ?

General GBZ-related chat goes here. Share ideas, tips and tricks, or ask questions that don't fit into the hardware/software help forums.
User avatar
Camble
Posts: 885
Joined: Thu May 05, 2016 2:31 am
Location: Scotland
Has thanked: 269 times
Been thanked: 488 times

Re: Wire diameter. What to choose ?

Post by Camble » Sat May 14, 2016 3:11 am

Fox wrote:Wermy said he used some wire from an IDE cable. I took an unused IDE cable that I have and the wire was 32awg! Maybe all IDE cables aren't created equal because that seems too small.
Try to find a floppy ribbon cable or 40pin IDE cable. If yours is very fine gauge, it's likely to be an 80pin cable.
40v80.jpg
40v80.jpg (16.67 KiB) Viewed 6238 times

User avatar
Kilren
Posts: 574
Joined: Wed May 11, 2016 4:40 pm
Location: Washington, USA
Has thanked: 35 times
Been thanked: 84 times

Re: Wire diameter. What to choose ?

Post by Kilren » Sat May 14, 2016 5:30 pm

Camble wrote:
Fox wrote:Wermy said he used some wire from an IDE cable. I took an unused IDE cable that I have and the wire was 32awg! Maybe all IDE cables aren't created equal because that seems too small.
Try to find a floppy ribbon cable or 40pin IDE cable. If yours is very fine gauge, it's likely to be an 80pin cable.

40v80.jpg
The IDE's biggest advantage is keeping all the cords clean and organized.

User avatar
crispy_tofu
Posts: 340
Joined: Thu May 05, 2016 1:51 am
Location: Australia
Been thanked: 5 times

Re: Wire diameter. What to choose ?

Post by crispy_tofu » Sat May 14, 2016 10:42 pm

They're also very thin, which means that they can wrap around things. Hence ribbon. :D

User avatar
dirtybeagles
Posts: 386
Joined: Thu May 05, 2016 6:04 am
Has thanked: 34 times
Been thanked: 64 times

Re: Wire diameter. What to choose ?

Post by dirtybeagles » Sat May 21, 2016 8:16 pm

Can anyone recommend a place to buy wires? I am having a hard time finding a place with spools. Amazon has kits, but they are not very flexible. They are very stiff wires.

User avatar
Fleder
Posts: 849
Joined: Thu May 05, 2016 9:04 am
Location: Germany
Has thanked: 183 times
Been thanked: 258 times

Re: Wire diameter. What to choose ?

Post by Fleder » Sun May 22, 2016 10:42 am

dirtybeagles wrote:Can anyone recommend a place to buy wires? I am having a hard time finding a place with spools. Amazon has kits, but they are not very flexible. They are very stiff wires.
Where are you from?

User avatar
dirtybeagles
Posts: 386
Joined: Thu May 05, 2016 6:04 am
Has thanked: 34 times
Been thanked: 64 times

Re: Wire diameter. What to choose ?

Post by dirtybeagles » Sun May 22, 2016 1:50 pm

Fleder wrote:
dirtybeagles wrote:Can anyone recommend a place to buy wires? I am having a hard time finding a place with spools. Amazon has kits, but they are not very flexible. They are very stiff wires.
Where are you from?
I found some at microcenter.

User avatar
Synnth3t1k
Posts: 22
Joined: Wed May 11, 2016 9:11 pm
Location: Maryland

Re: Wire diameter. What to choose ?

Post by Synnth3t1k » Sun May 22, 2016 4:17 pm

Microcenter carries 22-24awg wire. If your area still has a RadioShack, they have 20, 22, 26, and 30awg wire. I just picked up some 22 and 30, and the 30 is a single wire with insulation. I'm not sure that will work.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest