need screen help

General GBZ-related chat goes here. Share ideas, tips and tricks, or ask questions that don't fit into the hardware/software help forums.
Post Reply
Tonym
Posts: 9
Joined: Sat Sep 03, 2016 9:01 am

need screen help

Post by Tonym » Sat Sep 03, 2016 9:13 am

1472916304090.jpg
1472916304090.jpg (2.44 MiB) Viewed 5300 times
This is my first post, thanks for having me.

I ordered this screen on ebay and opened up the case to see what was inside. I tried searching the forums but i couldnt find an exact write up on using this board. Im on my tablet and the camera isnt the best.
1472915365838.jpg
Screen
1472915365838.jpg (131.56 KiB) Viewed 5303 times

Goggledone
Posts: 5
Joined: Sun Jul 03, 2016 4:01 am

Re: need screen help

Post by Goggledone » Sat Sep 03, 2016 11:32 pm

I also have this same screen setup and any help would be most appreciated . I would like to stick with this setup as it has a very small motherboard and an already attached daughter board for contrast and brightness . Please help . Thanks

Tonym
Posts: 9
Joined: Sat Sep 03, 2016 9:01 am

Re: need screen help

Post by Tonym » Sun Sep 04, 2016 3:07 pm

1473023096686.jpg
1473023096686.jpg (126.76 KiB) Viewed 5273 times
I did this and it works. Someome on facebook told me i only need the white or yellow wire. Not both. You just need to run a jumper to that chip

Goggledone
Posts: 5
Joined: Sun Jul 03, 2016 4:01 am

Re: need screen help

Post by Goggledone » Tue Sep 06, 2016 5:07 am

This is a great help . Would it be possible to get a more crisp image of the wire(s) and the connection point on the chip?

Tonym
Posts: 9
Joined: Sat Sep 03, 2016 9:01 am

Re: need screen help

Post by Tonym » Tue Sep 06, 2016 6:29 pm

1473208123544.jpg
1473208123544.jpg (2.14 MiB) Viewed 5225 times

Goggledone
Posts: 5
Joined: Sun Jul 03, 2016 4:01 am

Re: need screen help

Post by Goggledone » Wed Sep 07, 2016 1:32 am

Awesome! Thanks a lot. I hope to get my project together soon.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest