Page 1 of 1
Helder 2.2A board no audio through speaker
Posted: Mon Feb 06, 2017 5:37 am
by Billy@sudo
I am almost done with project and i hit the big roadblock. I have audio coming from headphone. I can also use volume wheel to lower it. But speaker doesn't work. It just make tic tic tic noise. I tried 3 different speakers and all volume settings but no luck. I am willing to giveup head phone jack on helder 2.2a board as long as speaker work. Please help.
Re: Helder 2.2A board no audio through speaker
Posted: Mon Feb 06, 2017 6:54 pm
by Helder
Billy@sudo wrote:I am almost done with project and i hit the big roadblock. I have audio coming from headphone. I can also use volume wheel to lower it. But speaker doesn't work. It just make tic tic tic noise. I tried 3 different speakers and all volume settings but no luck. I am willing to giveup head phone jack on helder 2.2a board as long as speaker work. Please help.
Go to the support thread in my signature, the answers are there and be sure your headphone socket has 5 pins and not 6 pins. I sent some wrong sockets out and if it's 6pins that could be the issue. Also post pictures of the headphone socket area.
Re: Helder 2.2A board no audio through speaker
Posted: Mon Feb 06, 2017 8:27 pm
by Billy@sudo
Helder wrote:Billy@sudo wrote:I am almost done with project and i hit the big roadblock. I have audio coming from headphone. I can also use volume wheel to lower it. But speaker doesn't work. It just make tic tic tic noise. I tried 3 different speakers and all volume settings but no luck. I am willing to giveup head phone jack on helder 2.2a board as long as speaker work. Please help.
Go to the support thread in my signature, the answers are there and be sure your headphone socket has 5 pins and not 6 pins. I sent some wrong sockets out and if it's 6pins that could be the issue. Also post pictures of the headphone socket area.
All looks good. I even reflow speaker and headphone connection
Re: Helder 2.2A board no audio through speaker
Posted: Tue Feb 07, 2017 10:11 am
by blameblaine
Billy@sudo wrote:I am almost done with project and i hit the big roadblock. I have audio coming from headphone. I can also use volume wheel to lower it. But speaker doesn't work. It just make tic tic tic noise. I tried 3 different speakers and all volume settings but no luck. I am willing to giveup head phone jack on helder 2.2a board as long as speaker work. Please help.
Use this method with the two resistors... works great! I used two 150 ohm resistors, so know that you have options.
http://www.sudomod.com/forum/viewtopic. ... &start=550
Re: Helder 2.2A board no audio through speaker
Posted: Wed Feb 08, 2017 4:09 am
by Billy@sudo
blameblaine wrote:Billy@sudo wrote:I am almost done with project and i hit the big roadblock. I have audio coming from headphone. I can also use volume wheel to lower it. But speaker doesn't work. It just make tic tic tic noise. I tried 3 different speakers and all volume settings but no luck. I am willing to giveup head phone jack on helder 2.2a board as long as speaker work. Please help.
Use this method with the two resistors... works great! I used two 150 ohm resistors, so know that you have options.
http://www.sudomod.com/forum/viewtopic. ... &start=550
Thank you i will try this. I hope this will fix sound issue.
I read through support forum before posting this topic. Because all people have some sound coming from speaker. I have none only tic tic noise. Headphone works great.
Re: Helder 2.2A board no audio through speaker
Posted: Wed Feb 08, 2017 6:37 am
by blameblaine
Billy@sudo wrote:blameblaine wrote:Billy@sudo wrote:I am almost done with project and i hit the big roadblock. I have audio coming from headphone. I can also use volume wheel to lower it. But speaker doesn't work. It just make tic tic tic noise. I tried 3 different speakers and all volume settings but no luck. I am willing to giveup head phone jack on helder 2.2a board as long as speaker work. Please help.
Use this method with the two resistors... works great! I used two 150 ohm resistors, so know that you have options.
http://www.sudomod.com/forum/viewtopic. ... &start=550
Thank you i will try this. I hope this will fix sound issue.
I read through support forum before posting this topic. Because all people have some sound coming from speaker. I have none only tic tic noise. Headphone works great.
That's exactly what I heard as well. Just little tic tic noises.
Re: Helder 2.2A board no audio through speaker
Posted: Wed Feb 08, 2017 1:28 pm
by Billy@sudo
blameblaine wrote:Billy@sudo wrote:
Thank you i will try this. I hope this will fix sound issue.
I read through support forum before posting this topic. Because all people have some sound coming from speaker. I have none only tic tic noise. Headphone works great.
That's exactly what I heard as well. Just little tic tic noises.
i ordered 1/2 watt 150 ohm resistors. i will give it a shot on friday. thank you
Re: Helder 2.2A board no audio through speaker
Posted: Sat Feb 11, 2017 4:21 am
by Billy@sudo
blameblaine wrote:Billy@sudo wrote:
Thank you i will try this. I hope this will fix sound issue.
I read through support forum before posting this topic. Because all people have some sound coming from speaker. I have none only tic tic noise. Headphone works great.
That's exactly what I heard as well. Just little tic tic noises.
Thank you blameblaine and helder. Sound is working from speaker now. Thanks for all the help.