Page 1 of 2
Sound issue
Posted: Fri Mar 31, 2017 4:06 pm
by Frigo
Hello everyone,
First, I'm very sory for my english but I'm french...
So I try to build a GBZ with a Pi3 and helder' pcb. Everything was ok till I test the sound. I've got nothing...(I mean I've got something looks like a "bee" sound that's all
)
I did excactly all the thing, but lot of exemple are for the Pi0 not for Pi3.
Do I need to reconfig the file config. ?? How I do?
And I'm thinking about to add an analog stick also, if someone know how to do I will be very interesting by that!
Please help me ! Thank you guy!
Re: Sound issue
Posted: Sat Apr 01, 2017 8:21 am
by Sesambrötchen
Hey,
how did you wire your sound output?
For my build I´ve used the build in audio of the RPi3.
Just wire the input on the potentiometer directly to the test pads.
PP25 L Audio
PP26 R Audio
Lout, Rout and Gnd from potentiometer to the Aio board an it should work fine.
By this way you don´t have to wire anything to the Rin and Lin on the Aio. (It´s only for pwm audio)
To use an analog stick you have to reprogram the Aio pcb.
http://www.sudomod.com/forum/viewtopic.php?f=25&t=1176 or
http://www.sudomod.com/forum/viewtopic.php?f=25&t=1228
Re: Sound issue
Posted: Sat Apr 01, 2017 10:38 am
by Frigo
Thank you. But I'm not very sure to understand everything. Can you Draw me a diagram ? Sory to ask you that.
Re: Sound issue
Posted: Sat Apr 01, 2017 11:17 am
by Sesambrötchen
Here is a picture.
- Pi3.JPG (863.43 KiB) Viewed 11396 times
The two wires got to the pads 25 and 26, the other to the Aio
Re: Sound issue
Posted: Sat Apr 01, 2017 3:43 pm
by Frigo
You're the best ! Thank you
Re: Sound issue
Posted: Tue Apr 18, 2017 7:20 am
by Frigo
The sound doesn't work at all... I really don't known how to do! Please someone help me
Re: Sound issue
Posted: Tue Apr 18, 2017 7:27 am
by Thump52
Can you send pics of your wiring
Re: Sound issue
Posted: Wed Apr 19, 2017 1:46 am
by Frigo
I've got no more wiring... I disoldered everything about sound. Back to 0. Do you have any idee?
Re: Sound issue
Posted: Sat Apr 22, 2017 6:41 pm
by Frigo
OK so, I've tried:
pp25 > pwm0 and pp26> pwm1 (Like chedda said in his build) with the potentiometer and without it:
Sound very low and static noise and the potentiometer doesn't change the volume.
Pp25 > Rout and pp26 > Lout
Sound more loud but more static sound also (and no more potentiometer...)
No one made a GBZ with helder V2.2 board and a pi3 around here?
I need help....
Re: Sound issue
Posted: Tue Apr 25, 2017 11:11 am
by GB3
Sorry I don't have any info for you, I'm going to be doing a build with Helder's AIO 2.2 and a pi 3. I'll be watching this thread. Hope you come to a solution!