GB0 - Supplies
-
- Posts: 97
- Joined: Wed May 04, 2016 10:04 pm
- Has thanked: 4 times
- Been thanked: 2 times
Re: GB0 - Supplies
@deltashadow and @wermy
What should be the length for my wires from PCB to Teensy LC? I don't want to make it too long to take up too much space inside but also dont want to make it too short.?
In video 2 it doesn't really say.
What should be the length for my wires from PCB to Teensy LC? I don't want to make it too long to take up too much space inside but also dont want to make it too short.?
In video 2 it doesn't really say.
- DeltaShadow
- Posts: 63
- Joined: Thu May 05, 2016 9:53 am
- Been thanked: 2 times
Re: GB0 - Supplies
This is a thing that I was wondering as well but I looked at this and guessed based on that I made mine about as long as the gameboy case.Thatbraziliann wrote:@deltashadow and @wermy
What should be the length for my wires from PCB to Teensy LC? I don't want to make it too long to take up too much space inside but also dont want to make it too short.?
In video 2 it doesn't really say.
Re: GB0 - Supplies
Definitely don't make it too short but make it long enough. Later, you can just cut and remove excess wires in the middle and reconnect by soldering and covering with heat shrink tubing to make it neat.
- 1461748123
- Posts: 143
- Joined: Wed May 04, 2016 8:36 pm
- Has thanked: 9 times
- Been thanked: 17 times
Re: GB0 - Supplies
Sorry to Hijack this thread, but seems to much to open a new one for 1 question...
(maybe make this the general topic for questions like: "will this work?"
My question:
Can you also fit the 2.500mah battery in the case?
This one for example: https://www.electronic-shop.lu/EN/products/144904
Or in other words...what is the biggest size you can put in the GB?
Adafruit shipping is way to expensive, so I'm looking on Aliexpress or the site from .lu as mentioned above.
The 2000mah battery they have is also a little wider then the one on Adafruit...
https://www.electronic-shop.lu/EN/products/150907
(maybe make this the general topic for questions like: "will this work?"
My question:
Can you also fit the 2.500mah battery in the case?
This one for example: https://www.electronic-shop.lu/EN/products/144904
Or in other words...what is the biggest size you can put in the GB?
Adafruit shipping is way to expensive, so I'm looking on Aliexpress or the site from .lu as mentioned above.
The 2000mah battery they have is also a little wider then the one on Adafruit...
https://www.electronic-shop.lu/EN/products/150907
Last edited by Jack on Fri May 06, 2016 5:19 am, edited 1 time in total.
- crispy_tofu
- Posts: 340
- Joined: Thu May 05, 2016 1:51 am
- Location: Australia
- Been thanked: 5 times
Re: GB0 - Supplies
You could probably also differentiate between different wires by putting stripes on them with a marker or something...
Another way to keep track of the wires could be to take lots of photos, and then you can upload them here afterwards!
Another way to keep track of the wires could be to take lots of photos, and then you can upload them here afterwards!
-
- Posts: 97
- Joined: Wed May 04, 2016 10:04 pm
- Has thanked: 4 times
- Been thanked: 2 times
Re: GB0 - Supplies
@Deltashadow Thank brotha yeah that definitely helps. I made the lengths slightly bigger than the gameboy.. (wish I saw this photo before I started last night).DeltaShadow wrote:This is a thing that I was wondering as well but I looked at thisThatbraziliann wrote:@deltashadow and @wermy
What should be the length for my wires from PCB to Teensy LC? I don't want to make it too long to take up too much space inside but also dont want to make it too short.?
In video 2 it doesn't really say.
IMG_2530-768x576.jpg
and guessed based on that I made mine about as long as the gameboy case.
@Chiz hahah love your profile pic it all makes sense now.
- DeltaShadow
- Posts: 63
- Joined: Thu May 05, 2016 9:53 am
- Been thanked: 2 times
Re: GB0 - Supplies
Those are both great ideas and I am now planning on doing both.crispy_tofu wrote:You could probably also differentiate between different wires by putting stripes on them with a marker or something...
Another way to keep track of the wires could be to take lots of photos, and then you can upload them here afterwards!
-
- Posts: 97
- Joined: Wed May 04, 2016 10:04 pm
- Has thanked: 4 times
- Been thanked: 2 times
Re: GB0 - Supplies
So radio shack has the ohm resistors but for capacitors they have UF capacitors not nf. Does that make a difference? ( I could order of Amazon but I don't need 60- 100 pieces of them
see this is what I'm looking at
https://www.radioshack.com/apps/search- ... oduct_type
see this is what I'm looking at
https://www.radioshack.com/apps/search- ... oduct_type
- DeltaShadow
- Posts: 63
- Joined: Thu May 05, 2016 9:53 am
- Been thanked: 2 times
Re: GB0 - Supplies
Where are you from ? I believe that we only need one of these and I have a few PM me.Thatbraziliann wrote:So radio shack has the ohm resistors but for capacitors they have UF capacitors not nf. Does that make a difference? ( I could order of Amazon but I don't need 60- 100 pieces of them
see this is what I'm looking at
https://www.radioshack.com/apps/search- ... oduct_type
Who is online
Users browsing this forum: No registered users and 1 guest