Page 1 of 1
Usb hub not working
Posted: Tue Jul 05, 2016 11:11 am
by Psy128
Has any one got this usb hub to work properly I can only get one port to work at one time e.g you plug in the key bored that will work plug in teensy it will work. Have them both plugged in only one will work.
Re: Usb hub not working
Posted: Tue Jul 05, 2016 11:21 am
by skrapps914
Psy128 wrote:Has any one got this usb hub to work properly I can only get one port to work at one time e.g you plug in the key bored that will work plug in teensy it will work. Have them both plugged in only one will work.
i had this issue with all the usb hubs ive tried, except the targus.
the targus even lets me hotswap.
have you tried having everything plugged in, before you boot?
Re: Usb hub not working
Posted: Tue Jul 05, 2016 11:30 am
by Psy128
skrapps914 wrote:Psy128 wrote:Has any one got this usb hub to work properly I can only get one port to work at one time e.g you plug in the key bored that will work plug in teensy it will work. Have them both plugged in only one will work.
i had this issue with all the usb hubs ive tried, except the targus.
the targus even lets me hotswap.
have you tried having everything plugged in, before you boot?
Yer I rebooted each time I'm going to give it another bash at it later just in case it's me but I'm 99.9 % it don'the work lol.
Re: Usb hub not working
Posted: Tue Jul 05, 2016 11:59 am
by Helder
Post images of it's insides especially the chip inside and we can track down a data sheet with more information on it's operation.
Re: Usb hub not working
Posted: Tue Jul 05, 2016 1:42 pm
by Psy128
Helder wrote:Post images of it's insides especially the chip inside and we can track down a data sheet with more information on it's operation.
This should be a good pic
Re: Usb hub not working
Posted: Tue Jul 05, 2016 4:09 pm
by Helder
The datasheet on that chip is garbage and no real useful info on it but I did find a raspberry pi forums thread on the same hub, maybe that can help a bit.
https://www.raspberrypi.org/forums/view ... 6&p=785153
Re: Usb hub not working
Posted: Mon Aug 08, 2016 7:03 am
by RxBrad
I got that hub and it didn't work.
When I opened it up, the four USB wires were shifted over so the open pin was the one closest to the USB ports.
...and I suspect that hooking it up in that configuration may have fried my Pi Zero.
Re: Usb hub not working
Posted: Sat Aug 13, 2016 11:31 am
by Psy128
RxBrad wrote:I got that hub and it didn't work.
When I opened it up, the four USB wires were shifted over so the open pin was the one closest to the USB ports.
...and I suspect that hooking it up in that configuration may have fried my Pi Zero.