Fleders GBZ incl. parts – incl. shop list for DE/EU
Re: Fleders GBZ incl. parts – incl. shop list for DE/EU
Hello @fleders
Nice job . I have the same screen.
How did you make the screen cover?
Thank you
Nice job . I have the same screen.
How did you make the screen cover?
Thank you
- crispy_tofu
- Posts: 340
- Joined: Thu May 05, 2016 1:51 am
- Location: Australia
- Been thanked: 5 times
Re: Fleders GBZ incl. parts – incl. shop list for DE/EU
@agarajag
This might be useful: http://sudomod.com/forum/viewtopic.php? ... p=836#p838
This might be useful: http://sudomod.com/forum/viewtopic.php? ... p=836#p838
- Fleder
- Posts: 849
- Joined: Thu May 05, 2016 9:04 am
- Location: Germany
- Has thanked: 183 times
- Been thanked: 258 times
Re: Fleders GBZ incl. parts – incl. shop list for DE/EU
Hi agarajag,agarajag wrote:Hello @fleders
Nice job . I have the same screen.
How did you make the screen cover?
Thank you
as tofu said, I did it nearly the same way, with a really sharp knife.
Just put the original screen on top and go over the edges again and again until you cut it through.
I used a nail file to smooth the edges, since my dremel would be too rough.
This is only a test, since I want to get laser cut screens, but it came out quite nice for a DIY.
Re: Fleders GBZ incl. parts – incl. shop list for DE/EU
Nice thread & great work Fleder. Will keep watching this
Re: Fleders GBZ incl. parts – incl. shop list for DE/EU
cool!!Fleder wrote:Hi agarajag,agarajag wrote:Hello @fleders
Nice job . I have the same screen.
How did you make the screen cover?
Thank you
as tofu said, I did it nearly the same way, with a really sharp knife.
Just put the original screen on top and go over the edges again and again until you cut it through.
I used a nail file to smooth the edges, since my dremel would be too rough.
This is only a test, since I want to get laser cut screens, but it came out quite nice for a DIY.
I'm going to try
- Fleder
- Posts: 849
- Joined: Thu May 05, 2016 9:04 am
- Location: Germany
- Has thanked: 183 times
- Been thanked: 258 times
Re: Fleders GBZ incl. parts – incl. shop list for DE/EU
solder wrote:Nice progress, will prolly use your buttonwells tip :3
- Fleder
- Posts: 849
- Joined: Thu May 05, 2016 9:04 am
- Location: Germany
- Has thanked: 183 times
- Been thanked: 258 times
Re: Fleders GBZ incl. parts – incl. shop list for DE/EU
finished my frankenstein controller board (bigger picture in the first post):
Last edited by Fleder on Sat May 14, 2016 3:41 am, edited 1 time in total.
- crispy_tofu
- Posts: 340
- Joined: Thu May 05, 2016 1:51 am
- Location: Australia
- Been thanked: 5 times
Re: Fleders GBZ incl. parts – incl. shop list for DE/EU
For a moment I thought that the tape was solder wick...
Looking good! I like how you put in some strain relief by threading the wires through the PCB.
Looking good! I like how you put in some strain relief by threading the wires through the PCB.
Re: Fleders GBZ incl. parts – incl. shop list for DE/EU
@Fleder
I can see we have a different PCB and this one you have seems easier to cut as it has ample clearance between the circuits. Were you able to still make the controller work via USB?
I can see we have a different PCB and this one you have seems easier to cut as it has ample clearance between the circuits. Were you able to still make the controller work via USB?
Who is online
Users browsing this forum: No registered users and 1 guest