2nd Gameboy Zero
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: 2nd Gameboy Zero
Ah ok! clear, thanks
so for that price a good screen to use
But if i look at the pictures correctly, it won't be possible to uses the cartridge reader with this?
so for that price a good screen to use
But if i look at the pictures correctly, it won't be possible to uses the cartridge reader with this?
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: 2nd Gameboy Zero
Ok, did a bit more reading and looking at the pictures provided in this thread.... and i am not that keen on using this HDMI screen....
reason: the aspect ratio is off, and if i want to fit it behind the normal screen protectors used for the BW like screens, it has a even lower resolution than the BW screens....
i would really love to have a crisper image, but i want to keep the "normal" look.....
up until now i have not found any affordable screens to get that result I am not willing to pay up to 100 dollars for a screen
looks like the 2nd build will also be with the BW like screen....
reason: the aspect ratio is off, and if i want to fit it behind the normal screen protectors used for the BW like screens, it has a even lower resolution than the BW screens....
i would really love to have a crisper image, but i want to keep the "normal" look.....
up until now i have not found any affordable screens to get that result I am not willing to pay up to 100 dollars for a screen
looks like the 2nd build will also be with the BW like screen....
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: 2nd Gameboy Zero
Looking at this post:
http://www.sudomod.com/forum/viewtopic. ... 910#p31774
it seems to be possible to get a really clear and crisp image using the hdmi screen... AND getting it in to the size of the bw screens (so i can use the same screenprotector).
i think using this screen will even eliminate the use of an usb dac audio card?? (if i use the jack plug of the screen, still need an amp for the speaker i think)
http://www.sudomod.com/forum/viewtopic. ... 910#p31774
it seems to be possible to get a really clear and crisp image using the hdmi screen... AND getting it in to the size of the bw screens (so i can use the same screenprotector).
i think using this screen will even eliminate the use of an usb dac audio card?? (if i use the jack plug of the screen, still need an amp for the speaker i think)
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: 2nd Gameboy Zero
Ok, so i have gathered some more parts:
- Pi0 (non W, they are expensive!!)
- audio amp
- teensy LC
also ordered a USB DAC, but if i am going to use the HDMI screen, i won't be using that
So what do i need:
- screen (still thinking about what screen to use, almost sure i am goinig with the HDMI one)
- screen protector (already sent @Dominator a PM for one )
- lipo
all the other stuff is waiting on my bench
- Pi0 (non W, they are expensive!!)
- audio amp
- teensy LC
also ordered a USB DAC, but if i am going to use the HDMI screen, i won't be using that
So what do i need:
- screen (still thinking about what screen to use, almost sure i am goinig with the HDMI one)
- screen protector (already sent @Dominator a PM for one )
- lipo
all the other stuff is waiting on my bench
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
-
- Posts: 28
- Joined: Fri Apr 21, 2017 9:02 am
- Has thanked: 14 times
- Been thanked: 10 times
Re: 2nd Gameboy Zero
Hey Bert. Happy that I might be inspring you to go HDMI, however it is not without difficulties. Mostly in the connection between the Pi and the screen. It's bulky and off the shelf cabling is tough to route. To get a cable that will work best, it might be needed to buy a male HDMI breakout plug and a male mini HDMI plug, then wire your own cable. I feel as though If I would have gone with a BW screen, I'd be done already... lol.BadBert wrote: ↑Fri May 19, 2017 2:44 amOk, so i have gathered some more parts:
- Pi0 (non W, they are expensive!!)
- audio amp
- teensy LC
also ordered a USB DAC, but if i am going to use the HDMI screen, i won't be using that
So what do i need:
- screen (still thinking about what screen to use, almost sure i am goinig with the HDMI one)
- screen protector (already sent @Dominator a PM for one )
- lipo
all the other stuff is waiting on my bench
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: 2nd Gameboy Zero
Hi Mark,mark memory wrote: ↑Mon May 22, 2017 1:54 pmHey Bert. Happy that I might be inspring you to go HDMI, however it is not without difficulties. Mostly in the connection between the Pi and the screen. It's bulky and off the shelf cabling is tough to route. To get a cable that will work best, it might be needed to buy a male HDMI breakout plug and a male mini HDMI plug, then wire your own cable. I feel as though If I would have gone with a BW screen, I'd be done already... lol.
that was exactly what i was planning to do make my own cable with 2 connectors
I know it will be a bit more of a challenge to build this 2nd build, but that what's fun
Thanks!
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: 2nd Gameboy Zero
Ok, so i have still not ordered a Lipo and a screen (and connectors if i need them).
Also ordered a USB hub (forgot that one).
i think i'll be going for the HDMI screen, but first i want to rewire my BW screen to see if that gives me a good enough picture )
already have the 3d printed parts, but if i go with the HDMI screen i'll have to redraw and reprint the screen bracket
Also ordered a USB hub (forgot that one).
i think i'll be going for the HDMI screen, but first i want to rewire my BW screen to see if that gives me a good enough picture )
already have the 3d printed parts, but if i go with the HDMI screen i'll have to redraw and reprint the screen bracket
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
-
- Posts: 230
- Joined: Sat Oct 29, 2016 12:31 am
- Location: Gelderland, Netherlands
- Has thanked: 55 times
- Been thanked: 60 times
Re: 2nd Gameboy Zero
And also i can help you with making the HDMI Screen compactor. If you need help text me. And please more pics of you build. hahahBadBert wrote: ↑Tue Jun 06, 2017 5:21 amOk, so i have still not ordered a Lipo and a screen (and connectors if i need them).
Also ordered a USB hub (forgot that one).
i think i'll be going for the HDMI screen, but first i want to rewire my BW screen to see if that gives me a good enough picture )
already have the 3d printed parts, but if i go with the HDMI screen i'll have to redraw and reprint the screen bracket
Whooo Stop befor ask in a post. First use the search or the wiki befor you make a topic.. Just saying.........
- BadBert
- Posts: 377
- Joined: Wed Jun 29, 2016 4:14 am
- Location: Hoogerheide, Netherlands
- Has thanked: 100 times
- Been thanked: 61 times
- Contact:
Re: 2nd Gameboy Zero
Cool! if i need any help, i'll let you know
i have not started the build yet, first i'll gather all the parts
in the meanwhile i received a screen protector (thanks to @Dominator)
After i have rewired the BW screen in my first build, i'll decide on the screen and order that.
Lipo, ill order the same as my first build (the custom lipo on the forum will take to long i'm affraid, missed the pre-order)
My first GBZ build -=HERE=- -> Became a gift to my little brother!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
My 2nd GBZ build -=WIP HERE=- -> going with HDMI!
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: 2nd Gameboy Zero
BW screens use composite which is blurry by default because of the video all crammed into one line as opposed to the digital crispness of HDMI. There is no comparison really from muddy analog to digital crispness of HDMI.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Who is online
Users browsing this forum: No registered users and 1 guest