Page 1 of 1
lololo's #1 GBZ PI3 / UPDATE -> power issue OK
Posted: Tue Oct 24, 2017 8:30 am
by Lololo
Hello,
Ffirst, thank you all for the incredible help that there is here....and in particular to HELDER, 144TECH, KUBINO, CAMBLE, VETERANGAMER, and all the others that I forget for the moment.
I do not have much time to summarize now but I already put some pictures because I arrive at the end.
I will complete the topic at the end of GBZ.
Thanks again to all.
- 20171024_160143.jpg (3.52 MiB) Viewed 6899 times
- 20171024_160203.jpg (3.4 MiB) Viewed 6899 times
- 20171024_160218.jpg (3.85 MiB) Viewed 6899 times
- 20171024_160229.jpg (3.44 MiB) Viewed 6899 times
- 20171024_162641.jpg (4.76 MiB) Viewed 6899 times
#UPDATE 1
Like everyone else, I have power problems when I add the screen to the circuit.
I found on the internet, a tiny supercaps (I took one of 470mF and 1F):
- 20171108_193637.jpg (3.5 MiB) Viewed 6707 times
I added it to powered the pi3 and now everything is perfect!
- 20171109_133111.jpg (3.91 MiB) Viewed 6707 times
- 20171109_145135.jpg (3.53 MiB) Viewed 6707 times
Re: lololo's #1 GBZ PI3 (Teaser)
Posted: Thu Oct 26, 2017 7:08 am
by rodocop
Looks good.
Re: lololo's #1 GBZ PI3 / UPDATE -> power issue OK
Posted: Thu Nov 09, 2017 7:06 am
by Lololo
#UPDATE 1
Like everyone else, I have power problems when I add the screen to the circuit.
I found on the internet, a tiny supercaps (I took one of 470mF and 1F):
- 20171108_193637.jpg (3.5 MiB) Viewed 6696 times
I added it to powered the pi3 and now everything is perfect!
- 20171109_133111.jpg (3.91 MiB) Viewed 6696 times
- 20171109_145135.jpg (3.53 MiB) Viewed 6696 times
Re: lololo's #1 GBZ PI3 / UPDATE -> power issue OK
Posted: Fri Nov 10, 2017 5:44 am
by DeRock89
Lololo wrote: ↑Thu Nov 09, 2017 7:06 am
#UPDATE 1
Like everyone else, I have power problems when I add the screen to the circuit.
I found on the internet, a tiny supercaps (I took one of 470mF and 1F):
20171108_193637.jpg
I added it to powered the pi3 and now everything is perfect!
20171109_133111.jpg
20171109_145135.jpg
Can you explain more about these caps? I'm using a pi3, and I THINK I am having power problems but I am unsure...
Re: lololo's #1 GBZ PI3 / UPDATE -> power issue OK
Posted: Mon Nov 13, 2017 2:36 am
by Lololo
Hello,
sorry, I do not know much about it but here is a link:
http://www.instructables.com/id/Lets-le ... actical-G/
I added that because I had freezes in Emulstation and since everything works perfectly.
there is still a slight problem is that the consumption has gone from ~ 1A to ~ 1.8A
it leaves me an hour of games with a battery of 3700mAh
Re: lololo's #1 GBZ PI3 / UPDATE -> power issue OK
Posted: Tue Nov 14, 2017 5:17 am
by DeRock89
Lololo wrote: ↑Mon Nov 13, 2017 2:36 am
Hello,
sorry, I do not know much about it but here is a link:
http://www.instructables.com/id/Lets-le ... actical-G/
I added that because I had freezes in Emulstation and since everything works perfectly.
there is still a slight problem is that the consumption has gone from ~ 1A to ~ 1.8A
it leaves me an hour of games with a battery of 3700mAh
Oh no.... I wonder why that is? I'm having similar issues and your post about these capacitors gave me some hope that this could be a possible solution...
Mine freezes when I attempt to open the retroarch menus when a game is being ran in my first build. I occasionally get the lightening bolt in the corner.
In my second build, I'm using an HDMI screen and the screen starts powering on and off when I turn the volume up...