DieselDummy's CSO build - #2 "The SudoNod"

Show off your completed Game Boy Zero, or post your build logs here!
Post Reply
User avatar
DieselDummy
Posts: 193
Joined: Tue Oct 24, 2017 12:20 pm
Location: Florida, USA
Has thanked: 79 times
Been thanked: 91 times

DieselDummy's CSO build - #2 "The SudoNod"

Post by DieselDummy » Tue Oct 30, 2018 7:21 pm

I've had this finished for a few months now and haven't had time to post it. It's the second Circuit Sword I've built and I'd like to call it the "sudoNod". It's more of a tip of the hat to some of the key players here on sudomod. Thank you all for your contributions.
Internals from Kite's Circuit Sword round 1
Screen bracket and mode/power bracket and Stormtrooper theme from HoolyHoo
Vented cartridge and bracket for Kite's R1L1 courtesy of AntFJ
Performance optimization and stickers and screen glass from YaYa the wizard
Splash screen from magaccio
GameBoy stand designed by moooarcuuuus


click the links if you want more info about each contribution.

photos below
TopShow
20181030_191823.jpg
top
20181030_191823.jpg (1.23 MiB) Viewed 3460 times
FrontShow
20181030_191710.jpg
front
20181030_191710.jpg (1.31 MiB) Viewed 3460 times
BottomShow
20181030_191724.jpg
bottom
20181030_191724.jpg (1.21 MiB) Viewed 3460 times
LeftShow
20181030_191758.jpg
left
20181030_191758.jpg (1.21 MiB) Viewed 3460 times
BackShow
20181030_191810.jpg
back
20181030_191810.jpg (1.31 MiB) Viewed 3460 times
RightShow
20181030_191743.jpg
right
20181030_191743.jpg (1.2 MiB) Viewed 3460 times
InsideShow
20181030_192139.jpg
insides
20181030_192139.jpg (1.66 MiB) Viewed 3460 times
BatteryShow
20181030_191915.jpg
battery
20181030_191915.jpg (1.35 MiB) Viewed 3460 times
StandShow
20181030_191837.jpg
stand
20181030_191837.jpg (1.32 MiB) Viewed 3460 times
the "sudoNod"Show
20181030_192603.jpg
with stand
20181030_192603.jpg (1.26 MiB) Viewed 3460 times
Thanks for reading.
also, putting this up for sale before i get in trouble for having too many toys
Last edited by DieselDummy on Tue May 21, 2019 1:44 pm, edited 1 time in total.

nurgle
Posts: 11
Joined: Wed Apr 26, 2017 5:07 am
Has thanked: 7 times

Re: Diesel Dummy's "sudoNod"

Post by nurgle » Wed Oct 31, 2018 4:06 am

Hi,

Do you have an STL file for the headphone socket surround you have used on your build? Makes it look very neat!

Cheers,

Nurgle

User avatar
DieselDummy
Posts: 193
Joined: Tue Oct 24, 2017 12:20 pm
Location: Florida, USA
Has thanked: 79 times
Been thanked: 91 times

Re: Diesel Dummy's "sudoNod"

Post by DieselDummy » Wed Oct 31, 2018 6:25 am

nurgle wrote:
Wed Oct 31, 2018 4:06 am
Hi,

Do you have an STL file for the headphone socket surround you have used on your build? Makes it look very neat!

Cheers,

Nurgle
I do. I'd be glad to share it too. Only thing is it's not a print and install kinda thing. I'm using a 0.4mm nozzle and it looked ugly when printing to the size needed for the headphone jack. So what I did was print with a smaller diameter then drilled it out as needed. I will upload as many different file types as i can when i get home (hopefully it will be useful as far as modifications go)

User avatar
DieselDummy
Posts: 193
Joined: Tue Oct 24, 2017 12:20 pm
Location: Florida, USA
Has thanked: 79 times
Been thanked: 91 times

Re: Diesel Dummy's "sudoNod"

Post by DieselDummy » Sun Nov 04, 2018 7:55 am

Ok, here are the files for the collar on the headphone jack.
The STL file was printed at 0.15 resolution. The hole must be drilled out to size i order to fit over the headphone jack. I've also included a step file if anyone would rather print it with a larger hole or perhaps try to print with a smaller nozzle. Hope this helps. I will also post it on the sudomod thingiverse page.
zip file with STL and STEPShow
headphone_jack_files.zip
(31.96 KiB) Downloaded 48 times
STL file onlyShow
headphone_jack_collar.stl
(86.31 KiB) Downloaded 41 times

nurgle
Posts: 11
Joined: Wed Apr 26, 2017 5:07 am
Has thanked: 7 times

Re: Diesel Dummy's "sudoNod"

Post by nurgle » Sun Nov 04, 2018 1:01 pm

Excellent, thank you!

reipet
Posts: 82
Joined: Sun Apr 23, 2017 3:52 am
Has thanked: 17 times
Been thanked: 31 times

Re: Diesel Dummy's "sudoNod"

Post by reipet » Mon Nov 05, 2018 6:34 am

Nice, how did you connect the fan with the solder points? What type of Connector is this?

User avatar
DieselDummy
Posts: 193
Joined: Tue Oct 24, 2017 12:20 pm
Location: Florida, USA
Has thanked: 79 times
Been thanked: 91 times

Re: Diesel Dummy's "sudoNod"

Post by DieselDummy » Mon Nov 05, 2018 10:55 am

reipet wrote:
Mon Nov 05, 2018 6:34 am
Nice, how did you connect the fan with the solder points? What type of Connector is this?
It's a simple JST connector, commonly used on the batteries. It may look a little different because I installed some heat shrink tubing on one side to provide some strain relief on the very thin fan wires.

User avatar
gambino37
Posts: 169
Joined: Fri Oct 20, 2017 7:17 am
Has thanked: 4 times
Been thanked: 46 times

Re: Diesel Dummy's "sudoNod"

Post by gambino37 » Thu Nov 08, 2018 7:56 am

Curious how you modified the USB dust cover to fit perfectly like that. Just really good dremelling?

User avatar
YaYa
Posts: 1719
Joined: Mon Jun 26, 2017 12:42 pm
Location: brittany - France
Has thanked: 871 times
Been thanked: 688 times
Contact:

Re: Diesel Dummy's "sudoNod"

Post by YaYa » Thu Nov 08, 2018 12:53 pm

Very nice build :D very clean, and i love the jack surround idea :D
Follow me on instagram Image

User avatar
DieselDummy
Posts: 193
Joined: Tue Oct 24, 2017 12:20 pm
Location: Florida, USA
Has thanked: 79 times
Been thanked: 91 times

Re: Diesel Dummy's "sudoNod"

Post by DieselDummy » Fri Nov 09, 2018 2:40 am

gambino37 wrote:
Thu Nov 08, 2018 7:56 am
Curious how you modified the USB dust cover to fit perfectly like that. Just really good dremelling?
No power tools needed. The cover was a simple modification using a file. The right size file in the right spot and the cover fits perfectly. I haven't had one fall out either.
1541756352558787408694.jpg
1541756352558787408694.jpg (929.24 KiB) Viewed 2930 times

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest