Make dpad more sensitive? Screen brightness?

[Fredl]

but as critical as i can be, i really don't like these screws poking out on the sides that really ruins it imo.
I would use different screws and ''sunk them'' in there.

I kind of like it! I mean the thing doesnt look like a GB anymore with all the USB and LAN ports sticking out anyways. So why not go full Frankenstein and add screws to the head?

Makes the thing even more tinkerish! Yummy!

[144TECH]

but as critical as i can be, i really don't like these screws poking out on the sides that really ruins it imo.
I would use different screws and ''sunk them'' in there.

I kind of like it! I mean the thing doesnt look like a GB anymore with all the USB and LAN ports sticking out anyways. So why not go full Frankenstein and add screws to the head?

Makes the thing even more tinkerish! Yummy!

Nooo man i mean.. you got such a kit and then when it comes to the finishing touch screws are sticking out the side lol.
But in frankenstein terms, yea i can't disagree lol.. but you can get (if you use a white or black case) some plastic screws that are like this \ /
So, you can turn them in nice and flat if you use a sinker for that, but hey, you could glue some corks on there too lol, and make it toxic green case and glue some red hair on it, haha

[sggeek]

Aiya are u talking about me 144Tech? i thought i was supposed to cut the glue sticks too. But i made a video to revert that. In the end 1mm thick round disks under the buttons is the solution.

Smoked by the guide~~ But anw this guide is just a direct translation from 1up. =P unless you guys are game to remake this and make a better guide?

[Fredl]

Aiya are u talking about me 144Tech? i thought i was supposed to cut the glue sticks too. But i made a video to revert that. In the end 1mm thick round disks under the buttons is the solution.

I think he was referring to the 1up guide The glue stick option is a crap idea tbh! I'm having little disks 3D printed by a friend and will glue them inside the buttons.

[144TECH]

Aiya are u talking about me 144Tech? i thought i was supposed to cut the glue sticks too. But i made a video to revert that. In the end 1mm thick round disks under the buttons is the solution.

Smoked by the guide~~ But anw this guide is just a direct translation from 1up. =P unless you guys are game to remake this and make a better guide?

Well that's kind off what i meant, with placing rubber material ontop of the rubber pads to make them a bit higher, i've used the rubber to repair bycycle tires and yes, adding a piece of gluestick inside the ABXY buttons is really lame, such a piece of rubber i said would have done a much better job.
Oh and i was speaking to the topicstarter, but could also been a suggestion for others with unsensitive Dpad

[sggeek]

Aiya are u talking about me 144Tech? i thought i was supposed to cut the glue sticks too. But i made a video to revert that. In the end 1mm thick round disks under the buttons is the solution.

Smoked by the guide~~ But anw this guide is just a direct translation from 1up. =P unless you guys are game to remake this and make a better guide?

Well that's kind off what i meant, with placing rubber material ontop of the rubber pads to make them a bit higher, i've used the rubber to repair bycycle tires and yes, adding a piece of gluestick inside the ABXY buttons is really lame, such a piece of rubber i said would have done a much better job.
Oh and i was speaking to the topicstarter, but could also been a suggestion for others with unsensitive Dpad

I think for my next shipment I'll put custom cut 7mm acrylic pieces underneath the buttons. The thing is, I kind of feel that 3d printed spaces might not be good enough . because it has a rough surfaces... thats why i'm trying the acrylic. but if you guys find any other better solution do share it.

[144TECH]

Aiya are u talking about me 144Tech? i thought i was supposed to cut the glue sticks too. But i made a video to revert that. In the end 1mm thick round disks under the buttons is the solution.

Just add some rubber under it, from bike-tire repair kit, anything would be fine, even gluestick it's just about bringing a bit more thickness ..