Need help desoldering pins on the 640x480 controller board.
Posted: Sat Aug 22, 2020 2:48 pm
Hi all,
I'm using the display found in this thread here:
viewtopic.php?f=42&t=120
Cannikin had mentioned in the thread that he removed these white JST plastic from the board and then desoldered the pins:
https://imgur.com/a/92KoWM9
I've removed the white plastic just fine, but I'm having trouble desoldering the pins. Has anyone done something like this before? What kind of tip should I be using on the iron? Would soldering wick be useful?
Any advice would be appreciated. Thanks!
I'm using the display found in this thread here:
viewtopic.php?f=42&t=120
Cannikin had mentioned in the thread that he removed these white JST plastic from the board and then desoldered the pins:
https://imgur.com/a/92KoWM9
I've removed the white plastic just fine, but I'm having trouble desoldering the pins. Has anyone done something like this before? What kind of tip should I be using on the iron? Would soldering wick be useful?
Any advice would be appreciated. Thanks!