sudomod

Hello,


After a few months with all things bought, finally I started with my GBZero in my holidays cause I had a lot of work and I think my cable is too fat.

My first problem https://krogerfeedback.nl https://talktosonic.onl https://talktowendys.vip https://whataburgersurvey.onl was with Helder AIO 2.2, I soldered the USB data lines to my RPi Zero and was too hard, and I think I destroyed the USB data line.


thanks
jackyjoy

Do you have any pictures it is salvageable likely.

Alternatively you can cut a micro usb cord, and plug it into the pi's usb, and solder the data wires (white and green) to the AIO