Hi, after retropie update the old retrogame does not work anymore. Now need to edit the retrogame.cfg for my PRS-Tech SNES-Zero.
Use this pinout:
https://www.sudomod.com/forum/viewtopic.php?f=22&t=57
My retrogame.cfg is:
LEFT 16 # Joypad left
RIGHT 27 # Joypad right
UP 15 # Joypad up
DOWN 28 # Joypad down
a 36 # 'A' button
b 31 # 'B' button
x 37 # 'X' button
y 35 # 'Y' button
s 29 # 'Select' button
ENTER 32 # 'Start' button
l 40 # Left shoulder button
r 38 # Right shoulder button
ESC 29 31 # Escape key: hold select + B for a second
But only one button is working. A button is Joypad left and rest, no function. Now need help editing the cfg.
Thanks!
retrogame.cfg problem
- rodocop
- Posts: 1723
- Joined: Mon Aug 22, 2016 3:14 pm
- Location: Saskatchewan
- Has thanked: 606 times
- Been thanked: 608 times
Re: retrogame.cfg problem
Use the BCM/gpio number not the physical pin number. For 'A' use 16, not 36. Do the same for the rest...it will work. Retrogame NEEDS the BCM/gpio number not the physical location number.
_____________________________________________________
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
Re: retrogame.cfg problem
Thanks! After editing the config. most button`s working now. Only Keypad up & right is without funktion. Use Pin 39 as ground. Somthing is wrong with my config?
LEFT 23 # Joypad left
RIGHT 0 # Joypad right
UP 22 # Joypad up
DOWN 1 # Joypad down
a 16 # 'A' button
b 6 # 'B' button
x 26 # 'X' button
y 19 # 'Y' button
s 5 # 'Select' button
ENTER 12 # 'Start' button
ESC 5 6 # Escape key: hold select + B for a second
Only up and right not working. Don't Know Why. Thanks again!
LEFT 23 # Joypad left
RIGHT 0 # Joypad right
UP 22 # Joypad up
DOWN 1 # Joypad down
a 16 # 'A' button
b 6 # 'B' button
x 26 # 'X' button
y 19 # 'Y' button
s 5 # 'Select' button
ENTER 12 # 'Start' button
ESC 5 6 # Escape key: hold select + B for a second
Only up and right not working. Don't Know Why. Thanks again!
- rodocop
- Posts: 1723
- Joined: Mon Aug 22, 2016 3:14 pm
- Location: Saskatchewan
- Has thanked: 606 times
- Been thanked: 608 times
Re: retrogame.cfg problem
Hmm, unless you are using another script that might be using those GPIO's? Can you ensure that the soldering to those GPIO's looks good? I assume these buttons worked fine in the past, so it probably isn't an issue with the silicone pads or buttons, but you could always check those.nexus23k wrote: ↑Wed Jul 17, 2019 7:26 amThanks! After editing the config. most button`s working now. Only Keypad up & right is without funktion. Use Pin 39 as ground. Somthing is wrong with my config?
LEFT 23 # Joypad left
RIGHT 0 # Joypad right
UP 22 # Joypad up
DOWN 1 # Joypad down
a 16 # 'A' button
b 6 # 'B' button
x 26 # 'X' button
y 19 # 'Y' button
s 5 # 'Select' button
ENTER 12 # 'Start' button
ESC 5 6 # Escape key: hold select + B for a second
Only up and right not working. Don't Know Why. Thanks again!
One other thing to do is to re map the controls in emulation station. See if that helps
_____________________________________________________
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
Re: retrogame.cfg problem
Thank you! Got it work.
All tested xxx time. Tested second button Pcb, new silicone rubber, min. 10 different layouts and configs... The problem was. The button PCB was stamp to hard silicone pads. This was the mistake. With lighter pressure all working fine now.
It`s not my snes pi with the problem. My selfmade wooden Gameboy takes me that stress.
Geetings and thanks again!
All tested xxx time. Tested second button Pcb, new silicone rubber, min. 10 different layouts and configs... The problem was. The button PCB was stamp to hard silicone pads. This was the mistake. With lighter pressure all working fine now.
It`s not my snes pi with the problem. My selfmade wooden Gameboy takes me that stress.
Geetings and thanks again!
Who is online
Users browsing this forum: No registered users and 1 guest