HDMI works, composite doesn't.
Posted: Tue Jul 23, 2019 12:25 am
Hi everybody,
I'm piecing my first GBZ build together to make sure I have a working system before stuffing it into the shell. Although I'm going to use an RP0 for the build, I'm currently using an old RP1 model B as a test mule -- I understand they're mostly similar. The monitor is a BW.
I'm using RetroPie 4.5.1. My config text was copied from this post. I've changed resolution settings and tried changing gpu_mem, but nothing seems to fix the problem, or even change the symptoms.
The problem is when I hook up an HDMI monitor, RetroPie and EmulationStation load and work as expected. When I hook the BW monitor up via composite input, RetroPie boots but EmulationStation doesn't. The errors are:
Google says there's a couple of reasons those errors could pop up, but none of them seem to make sense for my setup because my HDMI connection works just fine. I apologize if this is a known issue or an easy fix -- I couldn't find anything that made sense of this.
Any help would be appreciated.
I'm piecing my first GBZ build together to make sure I have a working system before stuffing it into the shell. Although I'm going to use an RP0 for the build, I'm currently using an old RP1 model B as a test mule -- I understand they're mostly similar. The monitor is a BW.
I'm using RetroPie 4.5.1. My config text was copied from this post. I've changed resolution settings and tried changing gpu_mem, but nothing seems to fix the problem, or even change the symptoms.
The problem is when I hook up an HDMI monitor, RetroPie and EmulationStation load and work as expected. When I hook the BW monitor up via composite input, RetroPie boots but EmulationStation doesn't. The errors are:
Code: Select all
lvl0: Error initializing SDL!
lvl0: Renderer failed to initialize!
lvl0: Window failed to initialize!
Any help would be appreciated.