sudomod

Hi all,

I've been looking at building something like a gameboy zero for ages, and I'm finally ordering components

So far, I've ordered

-Tinkerboy V2.0.1 board https://www.tinkerboy.xyz/product/game- ... oy-zero-3/
-Tinkerboy powerswitch https://www.tinkerboy.xyz/product/tinke ... rging+Port
-Aftermerket shell
Gearbest screen - https://www.tinkerboy.xyz/product/gearb ... -boy-zero/
Raspberry pi 0

I need

Extra buttons for front and back
Speaker
Bit of wire
Some brackets (I have models and a printer)
Screen cover

My understanding is that these components will get me going, any glaring missing parts?

I just want to be able to play GB and gbc games on it and maybe snes. It's more as a learning project for me and a bit of fun

Any help appreciated

EDIT TO ADD:

Battery
Volume Wheel
External USB Socket

Bump

Would really appreciate any help, trying to learn as i go

Are you sure that the Tinkerboy powerswitch will work without a battery? Normally these lipo charge/boost converter needs a battery to output 5V, even if you plug in USB power.

And you should consider making the pi USB accessible from outside, because that would make the setup a lot easy.

Also I can not find a volume wheel in your list. And do not forget about the conductive rubber pads, which you need between the button and PCB.

zentrum104 wrote: ↑

Fri Dec 27, 2019 6:05 am

Are you sure that the Tinkerboy powerswitch will work without a battery? Normally these lipo charge/boost converter needs a battery to output 5V, even if you plug in USB power.

And you should consider making the pi USB accessible from outside, because that would make the setup a lot easy.

Also I can not find a volume wheel in your list. And do not forget about the conductive rubber pads, which you need between the button and PCB.

Thanks mate,

Correct, i missed a battery in my list...

Also, good idea on USB and Volume wheel, i will add those and hopefully the rubber pads will come with the case i ordered!

Thanks again, i will post when my parts arrive