Soldering protection circuit module of battery

Hardware-related questions that don't fit into any of the specialized hardware categories go here.
Post Reply
snoek09
Posts: 128
Joined: Sat May 20, 2017 3:06 am
Location: Amsterdam, The Netherlands
Has thanked: 42 times
Been thanked: 36 times

Soldering protection circuit module of battery

Post by snoek09 » Mon Jan 08, 2018 8:26 am

I have a battery with a protection circuit module where 1 wire from the JST connector has broken off.
How dangerous is it to solder the wires back on the protection circuit module?
SpoilerShow
Image

User avatar
rodocop
Posts: 1148
Joined: Mon Aug 22, 2016 3:14 pm
Location: Saskatchewan
Has thanked: 462 times
Been thanked: 396 times

Re: Soldering protection circuit module of battery

Post by rodocop » Mon Jan 08, 2018 10:51 am

It should be fine, peel the tape away and expose the pad, and solder to it. As long as you are not applying insane heat for a long time it will be fine.
_____________________________________________________
My Minty Pi builds four so far:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds, thirteen and counting:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My four modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941

User avatar
rodocop
Posts: 1148
Joined: Mon Aug 22, 2016 3:14 pm
Location: Saskatchewan
Has thanked: 462 times
Been thanked: 396 times

Re: Soldering protection circuit module of battery

Post by rodocop » Mon Jan 08, 2018 9:10 pm

It's funny, I actually just had a battery tonight where one wire fell off. Pulled the tape off, and re soldered, then re taped. No issues what so ever!
_____________________________________________________
My Minty Pi builds four so far:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds, thirteen and counting:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My four modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941

User avatar
erik_gee
Posts: 305
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 107 times
Been thanked: 150 times

Re: Soldering protection circuit module of battery

Post by erik_gee » Wed Mar 07, 2018 12:34 pm

Yup what he said. Have had the same issue. Just tap it quick and don't leave it on for longer than necessary. Should be good to go
Tactile Cap Shoulder Button Bracket Sale Thread: http://www.sudomod.com/forum/viewtopic.php?f=38&t=3364

DMG Buttons Shoulder Bracket Sales Thread:http://www.sudomod.com/forum/viewtopic.php?f=40&t=3805


6 Button Common Ground Board Sales Thread: https://sudomod.com/forum/viewtopic.php?f=38&t=4811

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest