I need a little help. Some time ago I started a small project, because I wanted to give learning C++ a try. Building a better digital picture frame than the one I already have seemed like a good idea as the scope of such a software appeared reasonable. Lack of time and having to switch the involved tech several times made this a bit harder than expected, but now my program is running.
So now the next step would be the hardware – starting with a screen.
I'd like to use a screen of 9" or bigger and I'd like to power the Raspberry and the screen together. So I either need a screen that can draw power directly from the Pi or I need to find a way to power them both from one source of power (as in one switch switches on the Pi and the screen) – if that is possible at all. Unfortunately I don't know anything about electronics. I don't need to power this with a battery btw. Right now I am thinking about using a RPi3 as the Zero is lacking a bit in terms of performance.
My problem is that I do not know what to look for in a screen to have it draw power from the Raspberry and I don't know what tech would be involved if I wanted to power them both from one source.
Any tips what I should be looking for?
Finding a suitable screen - and powering it
Re: Finding a suitable screen - and powering it
If you've got any old/dead laptops sitting around, you could find a driver board for the screen on ebay. Most boards run on 12v or less and have 5v power on the board which you can use to power your Pi.
I used a Zero Wireless with a 10 inch screen from a netbook and a RPi3 with a 15 inch screen from a standard laptop. Works great, and a fun build! Cheap, too!
I used a Zero Wireless with a 10 inch screen from a netbook and a RPi3 with a 15 inch screen from a standard laptop. Works great, and a fun build! Cheap, too!
- neolith
- Posts: 192
- Joined: Mon Apr 24, 2017 12:43 pm
- Location: Germany
- Has thanked: 101 times
- Been thanked: 160 times
Re: Finding a suitable screen - and powering it
That's a good idea, I didn't know that driver boards have a 5v output! Thanks for the tip, I'll look into it!MegaLoop wrote: ↑Tue May 22, 2018 7:53 amIf you've got any old/dead laptops sitting around, you could find a driver board for the screen on ebay. Most boards run on 12v or less and have 5v power on the board which you can use to power your Pi.
I used a Zero Wireless with a 10 inch screen from a netbook and a RPi3 with a 15 inch screen from a standard laptop. Works great, and a fun build! Cheap, too!
– "The biggest trick the devil ever pulled was convincing the world he didn't exist." –
Who is online
Users browsing this forum: No registered users and 1 guest